i need a p pump here before long for my build. also need the gear. anybody have a set of 12 valve connecting rods sittin around? 24 valve p pump lines? any used 24 valve injectors 200hp or more

 

Here you go.....

Built P7100 913 Pump...
This is a pump that was built by the late Curtis Rice who worked for Antrim Diesel down in Greencastle,PA.It was built and ran on his stand which flowed 650cc's.It has his barrel/plungers,quick rate cam,governor springs and was one of the biggest 12mm pumps he would build.It was NEVER installed on my truck as the 500cc pump he built me did what I needed and without twins I felt I didn't need anymore fuel.I have long since sold my 12v and have no need for it,but,please understand before I give it away I will let it sit and rust.I have well over 5g's in the pump when it was built and understand the market now will not support that.At the price I have it listed for your getting a deal on a pump that will make plenty of power.His 500cc pump on my 12v made over 600rwhp on fuel with a 66mm turbo and over 800rwhp with a small shot of spray........$2800 + Shipping....Let me know.....Andy

 

that sounds like a vicious pump! a little more then im wanting to spend though sorry i cant help you out man id love to have a pump like that but not for dd

 

Not a problem....
You are just like many others,wanting maximum performance for no money spent.

 

not quite no money spent buddy just not 2800 or max performance! i hope you sell the pump though and i like your picture for avatar!! only lookin to spend 1500 for pump and mods

 

As I said...
Not a problem and guys like you are the reason I still have it sitting packed away.
Personally,I could care less if I sell I sell it,but,I can assure you before I give it away for less I would cut it up into small pieces with my plasma cutter and scrap it.It was listed as I see guys paying large sums of cash for pumps with bench tweak mods that could cost them alot less if they bought the parts and installed them themselves.

Tell you what to do...
Call Columbus Diesel Supply and ask for Mark.
Tell him you want a new P7100 built with a quick rate cam and set to flow 650cc or more for your cost($1500) as you are building a motor.Then tell all of us here what your cost is going to be for that pump.I can assure you it will be more than the price for mine and maybe you will have a better understanding of what I mean.

ANYONE can throw bench parts at a pump and make it flow but making it work through the entire desired RPM load takes a man who has the stand and the knowledge of what internals it takes to do that job.Again,your looking for power without wanting to spend money.

To me,thats like a blind squirrel trying to find a acorn..Sometimes it happens,but,not very often...........Good luck with the build.........Andy

P.S.-Thanks on the avatar photo...Motorhead Rules!

 

well see what happens