2nd gen oil pan
#3
Tell me HOW they are different from a 1st gen, give me pics and all.
I've used them from one to the other, no apparent difference.
With that, I have one off a '91, with the pickup tube for $100, shipped.
Mark.
---AutoMerged DoublePost---
FYI, J/Y Interchange shows NO difference between 4x4 and 2wd and it fits to 2002.
Mark.
I've used them from one to the other, no apparent difference.
With that, I have one off a '91, with the pickup tube for $100, shipped.
Mark.
---AutoMerged DoublePost---
FYI, J/Y Interchange shows NO difference between 4x4 and 2wd and it fits to 2002.
Mark.
Last edited by Mark Nixon; 11-28-2010 at 12:19 PM. Reason: Automerged Doublepost
#4
do a conversion and let your 2nd gen front axle rub a hole in the front of the first gen pan put on a second and have no issues thats how there different
thanks Dustin!
thanks Dustin!
Last edited by big bad diesel 416; 11-28-2010 at 12:35 PM.
#6
I dont have the time to argue with you about it you seem to have an abundance of parts go get a 1st gen 2WD pad and a 97 2nd gen 4x4 pan and see the difference I have done the conversion I have had the problem I have seen the difference and already fixed the issue with the other pan so dont come into my thread and tell me there is no difference you have to seem to argue with 90% of what people say just to find out that you are wrong/correct/or were trying to say what they were but in a different way (see injector line thread) I will not waste my time I have made my purchase from cummin_un_glued thanks
Brice
Brice
Thread
Thread Starter
Forum
Replies
Last Post