Thinking about pulling this year some
#12
for suspension stops i removed the factory rubber ones and used them for a pattern to make mine. I took a 1/4 inch plate of steel and marked the holes using the factory rubber stops as a template and then welded a piece of 1/4 inch c-channel to the plate. I'm making new ones out of 3"x1" box tubing with 1/4" walls.
---AutoMerged DoublePost---
I ran 4lo 3rd gear the first couple of times but, I ran out of rpms quickly. I was running a 62mm turbo too. After that I ran 4lo 4th. The biggest thing is just to have fun!
[color=grey][size=-2]
---AutoMerged DoublePost---
I ran 4lo 3rd gear the first couple of times but, I ran out of rpms quickly. I was running a 62mm turbo too. After that I ran 4lo 4th. The biggest thing is just to have fun!
[color=grey][size=-2]
Last edited by Dodgehunter84; 01-18-2010 at 08:38 PM. Reason: Automerged Doublepost
#13
#18
#19
yeah i know all that, im basically looking more for, what i need to do to the truck, as far as pulling hitch etc etc, what do i need for one, how do i make one, how do i set it up, how to do susp. stops, weight bracket etc. Thats stuff i know nothing about. Also maybe explain somewhat how to go about pulling with the truck, gear to use, how much to slip clutch, 4L or 4H and which gear to combine it with, that kinda stuff.
i already know what the motor needs done and theres a SBC DD going in this spring.
i already know what the motor needs done and theres a SBC DD going in this spring.
here is how I did my susp stops
Ill take some pics of my hitch and put them up tonight
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
04-08-2015 05:10 PM
Diesel Bombers
Latest Automotive Industry News
0
01-22-2015 11:40 AM
Diesel Bombers
Latest Automotive Industry News
0
12-03-2014 09:40 AM
Diesel Bombers
Latest Automotive Industry News
0
11-19-2014 08:10 PM
Diesel Bombers
Latest Automotive Industry News
0
10-28-2014 12:40 PM