Trailer Build Plans
#1
Trailer Build Plans
I'm gonna build one a my home brew Uncle Bubba Orginals trailers and wonderin if anybody has ever seen one of these either in plans or built.
I'm gonna build a dual axle tow dolly with a removable 14ft tilt deck. Pull the deck off and have a tow dolly, drop the deck on, put the pins in and have a 14ft flat tilt bed trailer, Bumper pull.
I'm gonna build a dual axle tow dolly with a removable 14ft tilt deck. Pull the deck off and have a tow dolly, drop the deck on, put the pins in and have a 14ft flat tilt bed trailer, Bumper pull.
#2
#3
#4
As near as I can figure it so far there will actually be three attachment points on each side, all pinned. It will sit down on the tongue and pin there when the bed is down, and on the dolly it will pin at both the front and back of the wheels. The upright supports for the fenders will both be attachments points.
Things have a habit of changing once I start buildin though so who knows what the final outcome will be. My kid always calls my creations transformers. They start out simple but as I go I tend to "way" overbuild them so things change a little during the process.
Things have a habit of changing once I start buildin though so who knows what the final outcome will be. My kid always calls my creations transformers. They start out simple but as I go I tend to "way" overbuild them so things change a little during the process.
#6
Just a wheel pocket, tie down apparatus and slide in ramps is about all I've ever found on tow dollies.
#8
#9
Found a thread on Pirate on one... recent too!
He said it worked OK but the dove tail messed up the pivot of teh dolly. It would need to be all flat.
Here is the link...
car hauler dolly combo - Pirate4x4.Com Bulletin Board
He said it worked OK but the dove tail messed up the pivot of teh dolly. It would need to be all flat.
Here is the link...
car hauler dolly combo - Pirate4x4.Com Bulletin Board
#10
Guess somebody else had the idea to. Thanks. I don't want a dovetail myself, that's why I want the tilt bed. I want this thing to haul the kids little race car that sit's about 3 inches off the ground on the trailer and my truck if I ever need to on the dolly portion. I'm thinkin if I put pins in front and back of the wheels that gives me the option of the tilt angle also depending on which pins I pull for it to pivot on.