offset, backspacing questions
#1
offset, backspacing questions
So i have been trying to figure this all out on my own but it is just not clicking in my head so i have decided to ask for some help. I have an 01 dodge 2500 4x4. I would like to get some new rims, but i dont want them to stick out real far or tuck under the truck either. what is the offset of a stock rim for my truck? I know the backspacing is 6.25" I like the Mickey Thompson Sidebiter rims, but the offset is 0, does that mean it will stick out really far? and help is greatly appreciated thanks guys
#2
#5
Same width? 0 Offset means the hub mounting surface is in the exact middle of the wheel.
Just going by backspacing, If the rims are the same width the MTs will stick out 1.25" more than the stock rims. If your going with some 33" or 35"s I think you'll have some fender rubbing issues unless you have a lift.
Just going by backspacing, If the rims are the same width the MTs will stick out 1.25" more than the stock rims. If your going with some 33" or 35"s I think you'll have some fender rubbing issues unless you have a lift.
#6
#7
#8
I have 35 12.50s MTZs on H2 rims. Stock height and it rubs on the control arms at full lock. That is just a fact of life. Unless you get rims that space the tires out more, then you have to have a lift or leveling kit in order to avoid major rubbing on the body. I had to take the mud flaps off the front as it is.
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
11-28-2014 09:50 PM
Diesel Bombers
General Diesel Related
0
11-12-2014 08:10 AM