Let me know how it goes down there. Wish I could go but need to start getting the truck ready to come apart.

Andy

 

yeah i guess it is harder to tune 8 cylinders than 6 guess thats why im smarter.

 

You can contact John Isaacs at Floor It Diesel and ask him. I would like to run the TS Performance event but probably won't due to funds and other obligations. And all of the 12 second and quicker street legal trucks that I've been around pull 1.7 and quicker. The Duramax Pro Street truck that I've seen the timeslip on ran a 1.32 on his mid 10 pass. It probably has a alot to do with the amount of fuel the race trucks are trying to burn. I hit full boost instantly from a 20 pound launch on 1.6 runs. If the track is slick I back off to 15 pound launches and still pull 1.7s. The only "street" trucks around here that won't pull those 60 foots are running huge laggy turbos or huge amounts of fuel that takes 15 minutes to stage. Of course even Kale Thompsons 11.6 Powerstroke that is street driven runs 1.5s and he takes forever to stage.

 

hey now lets not bring the power, durasnax, and cummapart comments into this.....

Now back to our regularly scheduled thread.....

How are yall launchin these beasts and especially for us hand shakers????

 

I heard from two guys that one just revs the engine up by pressing the gas pedal up and down just to get the turbo spinning.

The other one built about 30 pounds of boost with his stick and let her go.

 

How about Pre-spool with Compressed air ?

 

Hey DM I've never heard of that. Could you explain it in a nutshell?
Thanks

 

I cant explain it just heard of doing it b4

DM

 

I think some of you all have been drinking before typing in here and ts event was a blast. Just got home

 

The relative concept is to use compressed air from either a gas cylinder or on-board compressor to help spool your turbo prior to launch. It has been used in some drag racing but is real popular with the ricer crowd...to be effective, you may need a blow-off valve....Basicly pre-launch, you inject your turbo with compressed air to spool instead of using your engine...not sure if it could be adapted to our trucks, but might be worth investigating...

I have a friend here big into Mustangs, and he pre-spools twins on the Mustang prior to launching....he claims that every launch is at maximum boost using this technique. He has a digital gauge and sensor setup, and can monitor and control his boost and blow-off settings from the dashboard....

The twins, and the calibration tools and gauges for the dash ran near 6k for his application....but man does this car haul ***!!!