What do you guys think of this handgun ???
Thread Starter
|
Moderator
Joined: May 2008
Posts: 187,100
Likes: 9,677
From: MIAMI, FLORIDA
What do you guys think of this handgun ???
What you think of this handgun, can I find a holster for it. Guns For Sale : Class III - CGW manufacturing 8'' semi auto 12 gauge pistol - Auction: 9856137 (Ends 08/17/2011, 05:41:02 PST)
Diesel Wrench
Joined: Mar 2010
Posts: 785
Likes: 43
From: denver colorado
I have trouble believing its 922r compliant i believe you need 10 USA parts,I would make sure before I bought it . It must have a bunch of internals and its class 3 it would take at least 6 months to be in your hands. BUT I THINK ITS AWESOME I MUST DUEL WIELD
Last edited by 1993firstgennewbie; Aug 13, 2011 at 11:18 PM.
BOMBARDIER
Joined: Mar 2007
Posts: 11,159
Likes: 918
From: Gloucester, VA
Its probably 922 compliant...
Title 27 Chapter 1 Section 178.39 as found here http://www.atf.treas.gov/regulations/27cfr178.html
a) No person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph (c) of this section if the assembled firearm is prohibited from importation under section 925(d)(3) as not being particularly suitable for or readily adaptable to sporting purposes.
Paragraph (C) defines the following parts as "countable" under the law:
(1) Frames, receivers, receiver castings, forgings or stampings *
(2) Barrels *
(3) Barrel extensions
(4) Mounting blocks (trunions) * - US Made
(5) Muzzle attachments * -
(6) Bolts *
(7) Bolt carriers *
(8) Operating rods
(9) Gas pistons *
(10) Trigger housings - US Made
(11) Triggers * - US Made
(12) Hammers * - US Made
(13) Sears - US Made
(14) Disconnectors * - US Made
(15) Buttstocks *
(16) Pistol grips * - US Made
(17) Forearms, handguards *
(18) Magazine bodies * - US Made
(19) Followers * - US Made
(20) Floorplates * - US Made
These 20 items are referred to with the term "compliance parts". There are lots of other components that go into a weapon, but there are the only ones that count in terms of complying with the law.
Lots more of those parts can be US made too.
Here is a real nice AK-47 checklist. http://thegunwiki.com/Gunwiki/BuildAkVerifyCompliance Saiga 12 uses the same parts.
Title 27 Chapter 1 Section 178.39 as found here http://www.atf.treas.gov/regulations/27cfr178.html
a) No person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph (c) of this section if the assembled firearm is prohibited from importation under section 925(d)(3) as not being particularly suitable for or readily adaptable to sporting purposes.
Paragraph (C) defines the following parts as "countable" under the law:
(1) Frames, receivers, receiver castings, forgings or stampings *
(2) Barrels *
(3) Barrel extensions
(4) Mounting blocks (trunions) * - US Made
(5) Muzzle attachments * -
(6) Bolts *
(7) Bolt carriers *
(8) Operating rods
(9) Gas pistons *
(10) Trigger housings - US Made
(11) Triggers * - US Made
(12) Hammers * - US Made
(13) Sears - US Made
(14) Disconnectors * - US Made
(15) Buttstocks *
(16) Pistol grips * - US Made
(17) Forearms, handguards *
(18) Magazine bodies * - US Made
(19) Followers * - US Made
(20) Floorplates * - US Made
These 20 items are referred to with the term "compliance parts". There are lots of other components that go into a weapon, but there are the only ones that count in terms of complying with the law.
Lots more of those parts can be US made too.
Here is a real nice AK-47 checklist. http://thegunwiki.com/Gunwiki/BuildAkVerifyCompliance Saiga 12 uses the same parts.
Last edited by RSWORDS; Aug 14, 2011 at 09:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post
gunman41mag
The Sportsmen's Lounge
0
Jun 18, 2015 11:24 AM
Captainstubs1
Diesel Bombers Introduction
9
Jun 16, 2015 03:50 PM
xj_crawler
12 Valve 2nd Gen Dodge Cummins 94-98
12
Nov 20, 2014 10:17 PM
