ROCK RIVER ARMS AR-15
#32
#34
#35
---AutoMerged DoublePost---
Oh and Colt does not make current M16A2's, that's FN.....I can tear my Colt M16A2 apart & compare it to my other AR15's and tell a quality difference between fit, finish, gas key stacking and so on....Does RR parkerize underneath the A fame front sight???
You might fool yourself and others who do not know better but for people who really know what's going on in the world of AR15's you end up with egg on your face...
But hey, keep up the good work, soon it will be only you and your little buddy the yes man in this forum as you ran off al the other members...
Last edited by Ramprat; 11-30-2012 at 10:47 PM. Reason: Automerged Doublepost
#36
Don't forget ****......
---AutoMerged DoublePost---
If you say so, same barrels, same chambers, same chrome lining....same BCG's and are the MPI tested or batch tested if at all....same LPK, same MPI tested parts, same quality control, same everything except at a cheaper price....not to mention who is to say rock river parts are 100% mil spec.....
Oh and Colt does not make current M16A2's, that's FN.....I can tear my Colt M16A2 apart & compare it to my other AR15's and tell a quality difference between fit, finish, gas key stacking and so on....Does RR parkerize underneath the A fame front sight???
You might fool yourself and others who do not know better but for people who really know what's going on in the world of AR15's you end up with egg on your face...
But hey, keep up the good work, soon it will be only you and your little buddy the yes man in this forum as you ran off al the other members...
---AutoMerged DoublePost---
If you say so, same barrels, same chambers, same chrome lining....same BCG's and are the MPI tested or batch tested if at all....same LPK, same MPI tested parts, same quality control, same everything except at a cheaper price....not to mention who is to say rock river parts are 100% mil spec.....
Oh and Colt does not make current M16A2's, that's FN.....I can tear my Colt M16A2 apart & compare it to my other AR15's and tell a quality difference between fit, finish, gas key stacking and so on....Does RR parkerize underneath the A fame front sight???
You might fool yourself and others who do not know better but for people who really know what's going on in the world of AR15's you end up with egg on your face...
But hey, keep up the good work, soon it will be only you and your little buddy the yes man in this forum as you ran off al the other members...
Lauer, DS arms, PWA, Eagle, Armalite, Knights Armament, And Barrett
CMT- mills for
Stag, Rock River Arms, High standard, Noveski, Century, Global tactical, CLE, S & W, MGI, Wilson Tactical, Grenadier, Precision, Colt
LAR- mills for
Bushmaster, Ameetec, DPMS, CMMG, Double star, Fulton Armory, Spikes tactical
JVP- mills for
Double star, LRB
Mega Machine- mills for
GSE, Dalphon, POF, Alexander Arms
Olympic- mills for
SGW, Tromix, Palmetto, Dalphon, Frankford, Century
Sun devil was designed by TKS engeneering
Superior arms mills for superior.
#37
LMT- mills for
Lauer, DS arms, PWA, Eagle, Armalite, Knights Armament, And Barrett
CMT- mills for
Stag, Rock River Arms, High standard, Noveski, Century, Global tactical, CLE, S & W, MGI, Wilson Tactical, Grenadier, Precision, Colt
LAR- mills for
Bushmaster, Ameetec, DPMS, CMMG, Double star, Fulton Armory, Spikes tactical
JVP- mills for
Double star, LRB
Mega Machine- mills for
GSE, Dalphon, POF, Alexander Arms
Olympic- mills for
SGW, Tromix, Palmetto, Dalphon, Frankford, Century
Sun devil was designed by TKS engeneering
Superior arms mills for superior.
Lauer, DS arms, PWA, Eagle, Armalite, Knights Armament, And Barrett
CMT- mills for
Stag, Rock River Arms, High standard, Noveski, Century, Global tactical, CLE, S & W, MGI, Wilson Tactical, Grenadier, Precision, Colt
LAR- mills for
Bushmaster, Ameetec, DPMS, CMMG, Double star, Fulton Armory, Spikes tactical
JVP- mills for
Double star, LRB
Mega Machine- mills for
GSE, Dalphon, POF, Alexander Arms
Olympic- mills for
SGW, Tromix, Palmetto, Dalphon, Frankford, Century
Sun devil was designed by TKS engeneering
Superior arms mills for superior.
That is a old list and only covers part of the uppers and lowers, does not cover if they do al the finishing, or if the other company does the finishing and then the finish work on the receiver/upper.....are they all milled to the exact same specs, or are some left as blanks & then finish milled by the parent company....that list is a bare bones list that says nothing really...
It does not address all the LPK's, the different triggers, 1 stage, 2 stage and such...what is the differences and can you use the same LPK but with a match trigger.....how about barrels, BCGs and other assorted parts, it also does not address the forged lowers like my LaRue who is not listed....or the other forged lowers....and many other lowers that are not listed....Are teh bolts shot peened...or are they high pressure tested...or MPI tested...individual, batch or not tested at all...do they have the 5-coil extractor spring the black or blue insert....The M16 bolt carrier , or the AR15 bolt carrier..and what is the differences...you have yet to mention the carrier gas key if it is properly staked or not...or even if you know what a properly staked key looks like...and I've not seen anything about the barrel as far as it's chromoly and/or chrome-lined barrel and what that means Vs a stainless barrel...and what metal alloys the barrel is made up of....do they have the M4 feed rampes and what purpose if any does that make....or what taper the barrel has....and what twist the barrel has & what effect that plays on the bullets you shoot...how about the F hight front sight...is your castle nut staked & do you even know what that is...What kind of buffer do you have, how many different ones are theyre and what do they do & along wit that what kind of gas system is it & what diameter is the gas port....how abut taper pins, does RR use taper pins & do you know what they are....and why one would or would not want them....have not said anything about the firing pin...is it important, length, material....
Or is it a piston AR15 & what all does that entail.....
Next up, what about the about chamber, chrome or not, 5.56 or 223 or Wylide....and what they mean....
How bout the buffer tube, they have 2 kinds, what are they & what's the difference...
And what is .mil spec, who has .mil spec and what exactly does that mean...
I could go on and on about the differences between a quality AR15 and a meh...AR15 and a bottom of the barrel one....
Yet you know more and refuse to listen and learn.....
So have fun in your forum, bragging about what you have as nobody else is posting here and nobody really cares what you buy as you buy anything and everything & then brag about it....except your best friend and protector who himself has zero first hand knowledge about AR's but he has been reading magazines and on the web and as such knows so much....
But hey, figure if you want to know you can google some of what I've posted and then come back and impress everybody with what you learned from a computer....
Last edited by Ramprat; 12-01-2012 at 08:37 AM.
#38
And your point is????
That is a old list and only covers part of the uppers and lowers, does not cover if they do al the finishing, or if the other company does the finishing and then the finish work on the receiver/upper.....are they all milled to the exact same specs, or are some left as blanks & then finish milled by the parent company....that list is a bare bones list that says nothing really...
It does not address all the LPK's, the different triggers, 1 stage, 2 stage and such...what is the differences and can you use the same LPK but with a match trigger.....how about barrels, BCGs and other assorted parts, it also does not address the forged lowers like my LaRue who is not listed....or the other forged lowers....and many other lowers that are not listed....Are teh bolts shot peened...or are they high pressure tested...or MPI tested...individual, batch or not tested at all...do they have the 5-coil extractor spring the black or blue insert....The M16 bolt carrier , or the AR15 bolt carrier..and what is the differences...you have yet to mention the carrier gas key if it is properly staked or not...or even if you know what a properly staked key looks like...and I've not seen anything about the barrel as far as it's chromoly and/or chrome-lined barrel and what that means Vs a stainless barrel...and what metal alloys the barrel is made up of....do they have the M4 feed rampes and what purpose if any does that make....or what taper the barrel has....and what twist the barrel has & what effect that plays on the bullets you shoot...how about the F hight front sight...is your castle nut staked & do you even know what that is...What kind of buffer do you have, how many different ones are theyre and what do they do & along wit that what kind of gas system is it & what diameter is the gas port....how abut taper pins, does RR use taper pins & do you know what they are....and why one would or would not want them....have not said anything about the firing pin...is it important, length, material....
Or is it a piston AR15 & what all does that entail.....
Next up, what about the about chamber, chrome or not, 5.56 or 223 or Wylide....and what they mean....
How bout the buffer tube, they have 2 kinds, what are they & what's the difference...
And what is .mil spec, who has .mil spec and what exactly does that mean...
I could go on and on about the differences between a quality AR15 and a meh...AR15 and a bottom of the barrel one....
Yet you know more and refuse to listen and learn.....
So have fun in your forum, bragging about what you have as nobody else is posting here and nobody really cares what you buy as you buy anything and everything & then brag about it....except your best friend and protector who himself has zero first hand knowledge about AR's but he has been reading magazines and on the web and as such knows so much....
But hey, figure if you want to know you can google some of what I've posted and then come back and impress everybody with what you learned from a computer....
That is a old list and only covers part of the uppers and lowers, does not cover if they do al the finishing, or if the other company does the finishing and then the finish work on the receiver/upper.....are they all milled to the exact same specs, or are some left as blanks & then finish milled by the parent company....that list is a bare bones list that says nothing really...
It does not address all the LPK's, the different triggers, 1 stage, 2 stage and such...what is the differences and can you use the same LPK but with a match trigger.....how about barrels, BCGs and other assorted parts, it also does not address the forged lowers like my LaRue who is not listed....or the other forged lowers....and many other lowers that are not listed....Are teh bolts shot peened...or are they high pressure tested...or MPI tested...individual, batch or not tested at all...do they have the 5-coil extractor spring the black or blue insert....The M16 bolt carrier , or the AR15 bolt carrier..and what is the differences...you have yet to mention the carrier gas key if it is properly staked or not...or even if you know what a properly staked key looks like...and I've not seen anything about the barrel as far as it's chromoly and/or chrome-lined barrel and what that means Vs a stainless barrel...and what metal alloys the barrel is made up of....do they have the M4 feed rampes and what purpose if any does that make....or what taper the barrel has....and what twist the barrel has & what effect that plays on the bullets you shoot...how about the F hight front sight...is your castle nut staked & do you even know what that is...What kind of buffer do you have, how many different ones are theyre and what do they do & along wit that what kind of gas system is it & what diameter is the gas port....how abut taper pins, does RR use taper pins & do you know what they are....and why one would or would not want them....have not said anything about the firing pin...is it important, length, material....
Or is it a piston AR15 & what all does that entail.....
Next up, what about the about chamber, chrome or not, 5.56 or 223 or Wylide....and what they mean....
How bout the buffer tube, they have 2 kinds, what are they & what's the difference...
And what is .mil spec, who has .mil spec and what exactly does that mean...
I could go on and on about the differences between a quality AR15 and a meh...AR15 and a bottom of the barrel one....
Yet you know more and refuse to listen and learn.....
So have fun in your forum, bragging about what you have as nobody else is posting here and nobody really cares what you buy as you buy anything and everything & then brag about it....except your best friend and protector who himself has zero first hand knowledge about AR's but he has been reading magazines and on the web and as such knows so much....
But hey, figure if you want to know you can google some of what I've posted and then come back and impress everybody with what you learned from a computer....
#39
No thanks, did that for 5 years (both structural and wildland) made Lt and have no need to prove myself to anybody as I've seen and done stuff less than 1% of America has...I've got enough T shirts and crap on my "I love me wall"
Not to mention it's a young mans game and I'm getting operated on next week..Think I'll just hang out at the DAV (life member) and post on Internet forums...
Not to mention it's a young mans game and I'm getting operated on next week..Think I'll just hang out at the DAV (life member) and post on Internet forums...
#40
Wanna be firefighter Damn must have took you a while to come up with that one
---AutoMerged DoublePost---
Make sure you come on every day and cry about your surgury
---AutoMerged DoublePost---
No thanks, did that for 5 years (both structural and wildland) made Lt and have no need to prove myself to anybody as I've seen and done stuff less than 1% of America has...I've got enough T shirts and crap on my "I love me wall"
Not to mention it's a young mans game and I'm getting operated on next week..Think I'll just hang out at the DAV (life member) and post on Internet forums...
Not to mention it's a young mans game and I'm getting operated on next week..Think I'll just hang out at the DAV (life member) and post on Internet forums...
Last edited by tiremann9669; 12-01-2012 at 09:38 AM. Reason: Automerged Doublepost