Project Resurection P-Pump
Progress slowed alil bit since I've been out drivin it around now but, I have added a couple new things and most noticable is the 7" rolled tip stack! 
6 inch hole saw is the ONLY way to do it imo...




Great clamp from GrandRock but o had to mod it so the bolts were able to come into the bracket so I could tightent it. No big deal, 4 spot welds to cut holding the bolt and pound them out with a hammer.

My temp. rain cal till I buy a stack condom

New licence plat light till I get a roll pan

6 inch hole saw is the ONLY way to do it imo...




Great clamp from GrandRock but o had to mod it so the bolts were able to come into the bracket so I could tightent it. No big deal, 4 spot welds to cut holding the bolt and pound them out with a hammer.

My temp. rain cal till I buy a stack condom


New licence plat light till I get a roll pan
Last edited by Red_Rattler; Jul 14, 2010 at 06:31 PM.





When are you sending the 12v down?
I saw a BEARS sticker on the garage door at the paint shop 