shorty stroke build
#1
shorty stroke build
just got a 99 250 long bed reg cab, im making it a shortbed. heres how im choppin it down to a shortbed.
i will cut the wheel arch out then cut a 1.5-2 foot section above there and all the way across. and slide the back of the bed forward till i close the gap. i will need to move my axle forward about 6 ". im thinking 22,s on front and 24,s on back. kind of dropped drag truck. oh and this truck is a powerstoke. i know its a little different, but i think if done right it should turn out really cool.
heres a little progress as of yesterday, i started moving all the hangers forward. im trying to keep the factory rear springs but if i cant i will go 4 link. but after alot of measuring, i think the rear bumper will hide the rear hanger if done right. the gap in front of the tailight needs to come forward about 5 inches still.
---AutoMerged DoublePost---
i made some progress. i got the rest cut and had a hell of a time getting the spring hangers off. but got and moved the axle forward 5 inches and raised all my hangers and got 4 inches lower. and as you can see the springs set out behind the end of the bed, but the bumper with modified brackets covers the shackles and hangers. so it did end up a 6.5 bed, 13" shorter behind wheel and 5" shorter in front of the wheel. still got to shorten driveshaft and weld bedsides. going to get 3" lower rear springs and 3" lower i beams and 1 lower coils for the front. and still running the stock longbed tank.
hard to get a good pic till i get it out of the garage.
i will cut the wheel arch out then cut a 1.5-2 foot section above there and all the way across. and slide the back of the bed forward till i close the gap. i will need to move my axle forward about 6 ". im thinking 22,s on front and 24,s on back. kind of dropped drag truck. oh and this truck is a powerstoke. i know its a little different, but i think if done right it should turn out really cool.
heres a little progress as of yesterday, i started moving all the hangers forward. im trying to keep the factory rear springs but if i cant i will go 4 link. but after alot of measuring, i think the rear bumper will hide the rear hanger if done right. the gap in front of the tailight needs to come forward about 5 inches still.
---AutoMerged DoublePost---
i made some progress. i got the rest cut and had a hell of a time getting the spring hangers off. but got and moved the axle forward 5 inches and raised all my hangers and got 4 inches lower. and as you can see the springs set out behind the end of the bed, but the bumper with modified brackets covers the shackles and hangers. so it did end up a 6.5 bed, 13" shorter behind wheel and 5" shorter in front of the wheel. still got to shorten driveshaft and weld bedsides. going to get 3" lower rear springs and 3" lower i beams and 1 lower coils for the front. and still running the stock longbed tank.
hard to get a good pic till i get it out of the garage.
Last edited by rancid; 09-07-2009 at 08:07 PM. Reason: Automerged Doublepost
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
12-10-2014 08:10 AM
Diesel Bombers
General Diesel Related
0
10-15-2014 12:30 AM
Diesel Bombers
General Diesel Related
0
10-13-2014 08:10 AM