how's your CB mounted?
#1
how's your CB mounted?
Needin some help guys. I've got an '01 Dodge with the 6spd and I just can't figure a good place to mount my CB where it's not in the way. I mached it up in front of that pocket under the radio but it makes goin into reverse difficult. So any pics of what ya'll are doin would be much appreciated.
#2
#3
Couple of idea's
Geno's kit
CB MOUNT ('94-'02 DODGE)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage
On dads 99 we mounted it on the knee bolster like in my truck next to the ash tray. On my ol 2000 auto I screwed it right to the drop down cup holder.
Where I mounted mine... 3rd gen.
Geno's kit
CB MOUNT ('94-'02 DODGE)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage
On dads 99 we mounted it on the knee bolster like in my truck next to the ash tray. On my ol 2000 auto I screwed it right to the drop down cup holder.
Where I mounted mine... 3rd gen.
Last edited by Red_Rattler; 03-03-2009 at 04:15 PM.
The following users liked this post:
AF1CUMMINS (03-04-2009)
#4
It all depends on what kind of CB you have, plan on getting. On my 02 I mounted my Cobra 19 in the little storage box on the dash, it fit perfect. When I upgraded to a Cobra 25 I put in the same spot but some modding needed to be done. I'll see if I can find the pic of it. Here is where I mounted it on my 06.
#5
Couple of idea's
Geno's kit
CB MOUNT ('94-'02 DODGE)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage
On dads 99 we mounted it on the knee bolster like in my truck next to the ash tray. On my ol 2000 auto I screwed it right to the drop down cup holder.
Where I mounted mine... 3rd gen.
Geno's kit
CB MOUNT ('94-'02 DODGE)-Dodge Cummins and Ford Power Stroke Diesel Truck Accessories - Geno's Garage
On dads 99 we mounted it on the knee bolster like in my truck next to the ash tray. On my ol 2000 auto I screwed it right to the drop down cup holder.
Where I mounted mine... 3rd gen.
#6
#10
mine used to set on the trans hump and I had my high idle switch mounted to the side of it.
Then I made the new shifter with the switches on it and decided I didnt like the shifter hitting the radio. So I cut out the cubby hole in the dash and shoved it in there. Looks factory if you ask me
Then I made the new shifter with the switches on it and decided I didnt like the shifter hitting the radio. So I cut out the cubby hole in the dash and shoved it in there. Looks factory if you ask me