Diesel Bombers

Show And Tell Got Photos or Videos of Your Diesel ? - Post Here and Tell Us About it , We Support Most Video Sites , Diesel Videos will Auto Embed .

rockwell rebuild

Thread Tools
 
Search this Thread
 
Old May 28, 2007 | 05:44 PM
Share
  #11  
miss_un_glued's Avatar
IT'S A GIRL!
Joined: Mar 2007
Posts: 19
Likes: 1
From: Ash Flat AR.
Post
i not only ask him to help me with my truck (as you can see i help him with his), but he also gets the pleasure of spending MY money on MY truck. along with spending HIS money on HIS truck.....so it ends up even trade
 
Reply
0
Old May 28, 2007 | 06:00 PM
Share
  #12  
cummin_un_glued's Avatar
Thread Starter
|
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
yeah Win Win situation
 
Reply
0
Old May 28, 2007 | 09:02 PM
Share
  #13  
scarecrow's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 768
Likes: 86
From: nowhere good
Default
nice........once you get that back together you can come on up north and rebuild my rocks......
 
Reply
0
Old May 28, 2007 | 09:10 PM
Share
  #14  
bow2no1's Avatar
Diesel Bomber
Joined: Mar 2007
Posts: 4,321
Likes: 188
From: philadelphia, PA
Default
Originally Posted by miss_un_glued
i not only ask him to help me with my truck (as you can see i help him with his), but he also gets the pleasure of spending MY money on MY truck. along with spending HIS money on HIS truck.....so it ends up even trade
i wish i had it that good. i spend my money on my truck and my money on the better halfs car also.. ony cost me $140 today
 
Reply
0
Old May 28, 2007 | 09:31 PM
Share
  #15  
Dr. Evil's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Default
Originally Posted by bow2no1
i wish i had it that good. i spend my money on my truck and my money on the better halfs car also.. ony cost me $140 today
Sounds familiar....
 
Reply
0
Old May 28, 2007 | 10:12 PM
Share
  #16  
cummin_un_glued's Avatar
Thread Starter
|
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
scarecrow you got some rockwells man? what are you putting them in? i got all my rebuild parts from memphis equipment great service btw and now both of my axles are ready to go just waitin on my new shop to be built next month so that i can use the new 2 post lift to put the axles in.....should be alot easier then usein jackstands floor jacks
 
Reply
0
Old May 28, 2007 | 10:23 PM
Share
  #17  
dozerboy's Avatar
Diesel Wrench
Joined: Apr 2007
Posts: 988
Likes: 55
From: TX
Default
Lucky guy mine will get dirty, but if it takes more then an 8" 3/8 ratchet or its in tight quarters all of a sudden she can't figure it out. Well that could be because she had an accident with a crowbar and my truck trying to help me once. I think she feared for her life, and is now scared of hurting my baby.
 
Reply
0
Old May 28, 2007 | 10:28 PM
Share
  #18  
cummin_un_glued's Avatar
Thread Starter
|
FormerVendor
iTrader: (1)
Joined: Mar 2007
Posts: 1,748
Likes: 107
From: Ash Flat Arkansas
Default
that sucks dozer hope they were both ok afterwards

give her time maybe she'll get where she isnt as affraid of hurtin herself or your truck again

funny thing was when i was showin her how to pack the wheel bearings when we got to the ones on the other side she wanted to do it but i have to say she done a fine job
 
Reply
0
Old May 29, 2007 | 08:32 AM
Share
  #19  
scarecrow's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 768
Likes: 86
From: nowhere good
Default
Originally Posted by cummin_un_glued
scarecrow you got some rockwells man? what are you putting them in? i got all my rebuild parts from memphis equipment great service btw and now both of my axles are ready to go just waitin on my new shop to be built next month so that i can use the new 2 post lift to put the axles in.....should be alot easier then usein jackstands floor jacks
yea 1 steer and 1 rear. i am putting them under a 86 chevy shortbed stepside with a set of 53in xl michelins for now. i really want a set of 48x25x20 V-treads but i dont have that kinda money right now....my front axle is in pieces right now waiting for seals to rebuild. and i have not touched the rear or the transfer case yet...the t-case is a NP200..i am doing all my work in a stone driveway which is not level.
 
Reply
0
Old May 29, 2007 | 09:40 AM
Share
  #20  
miss_un_glued's Avatar
IT'S A GIRL!
Joined: Mar 2007
Posts: 19
Likes: 1
From: Ash Flat AR.
Post
Originally Posted by cummin_un_glued
funny thing was when i was showin her how to pack the wheel bearings when we got to the ones on the other side she wanted to do it but i have to say she done a fine job

Hence the grease all over my hands in the picture!!! I had just finished that lil project!!

I guess I didn't do to bad of a job since he has already asked me to help him install his new clutch!
 
Reply
0



Advanced Search

All times are GMT -5. The time now is 06:04 AM.