im likin your camo coat i see in your stack there trent

 

If you ever sell thta rear bumper i would love to have it.... Where in NY are you from. Im from Hyde Park?

 

Their just one of my hair brained idea,s.I had to mount the winch high in the frame (another story)and where I had to position it left very few options for mounting of cross members for mounts.The front mount is positioned inside a factory cross member and I,m happy with its rigity,but the rear cross member is clamped to the frame then bolted up into a factory cross member.I was kinda afraid of this one trying to walk around ,putting a lota strain on the body of the winch,so since I had to have a place to mount the fair lead anyway ,I cobbed up those struts to push off the hitch and sorta vise the winch between the two cross members to prevent any movement and gave me a place to mount the fairlead,I probably worry too much.

---AutoMerged DoublePost---

Thanks, I probably wont be parting with it any time soon.I,m located in the small town of Byron ,about half way between Buffalo and Rochester ,quite a ways from you since I see your down in the Albany area.

 

custom headache rack, custom front light bar, custom track bars, custom stack chamber

 

DSP5 and switches mount

https://www.dieselbombers.com/showpo...2&postcount=43

 

My cb antenna mounts

 

those ar cool im actually working on a twin turbo setup for my truck using the stock turbo and a phat shaft 62

 

theres are the three parts i fabd you can see

 

thinking about fabing my own exhaust brake

 

Its not a AFE but was copied off of that I had to customize for the plow lights harness and what not. It has dads old AFE filter on it so my total cost into this is $40 the turbo SCREAMS when I get into it now! for awhile I thought it was turbo-less since you could barely hear it.

I put the afe decal on



Ian