Factory five bar vs factory radius arm. - Diesel Bombers

Shade Tree , Pro-Mechanics & Fabrication Discussion of Fabrication of various products form your diesel as well as welders, Power Tools , Hand Tools , Shops, Garages , Lifts And More Including Tips and Tricks

LinkBack Thread Tools Search this Thread
Old 04-18-2017, 01:40 PM
BioHMMWV's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2009
Posts: 58
Default Factory five bar vs factory radius arm.

I'm not getting anywhere in the Ram general discussion. I hope I don't tick off the mods by posting in the fabrication section of the forum . I will be doing fabrication on the truck anyway.

I did a quick search and did not find anything on here and google.
Does anyone have experience in both the 4x4 five bar link on the pre 2012 ram and the three bar on the 2013 Ram?
As every one knows the Ford and Ram share the same type of suspension
I have a 1995 4x4 Ram. I am putting a 2010 Ford axle under the truck after I drill the bolt holes for 8x6.5. My plans with the front axle is to put a 3rd gen ram track bar on and swap the knuckles out to 1992-1997 Ford knuckles to gain lockout hubs, spindles and duel piston calipers.
I have the opportunity to get a three bar with the axle off of a Ford for less than $300 and I don't know if there is a big enough improvement in handling to merit the change. There would also be the benefit of larger disc brakes not having to drill out the rear axle hubs since both the front and rear would match and I could use the track bar from the Ford.

So, anyone know if the suspension change is significantly better in the newer Ram three link vs the five bar?
Thanks in advance.
Reply With Quote
Old 04-18-2017, 06:28 PM
BioHMMWV's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2009
Posts: 58

i just measured the two trucks and I'll have to put a 2.5inch spacer on each side of the frame where the springs go. The added width should increase stability. Where the radius arms mount is the same width Ford and 2nd gen ram. Bonus, the transmission mount is in the same spot as the suspension mount for strength.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 04:48 AM.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.