89 W350 SRW parts in eastern pa
#1
89 W350 SRW parts in eastern pa
For sale I have some leftovers from my 89. Parts are located in Pen Argyl Pa 18072. Prices are OBO.
1. Long block, no head or ve but everything else is there still has cross hatching in the cyl walls. $850
2. Non IC VE with lines, already installed is a 3200 gov spring and also has a custom ground fuel pin. $450
3. Set of 3.07 SRW one ton rears, front has the "Selecto" hubs. Both are complete from end to end. $1000
4. Reg cab 8' bed 4x4 bare frame, $300 ,, 1 ton leaf springs, $250
5. Set of almost new 235/85/16 Goodyear silent armor "E" rated tires on a set of ford steel wheels, These tires have less then 1500 miles on them, $550
Any questions please feel free to ask. Would prefer local pick up on the "bigger" stuff.
Thanks, Ryan
1. Long block, no head or ve but everything else is there still has cross hatching in the cyl walls. $850
2. Non IC VE with lines, already installed is a 3200 gov spring and also has a custom ground fuel pin. $450
3. Set of 3.07 SRW one ton rears, front has the "Selecto" hubs. Both are complete from end to end. $1000
4. Reg cab 8' bed 4x4 bare frame, $300 ,, 1 ton leaf springs, $250
5. Set of almost new 235/85/16 Goodyear silent armor "E" rated tires on a set of ford steel wheels, These tires have less then 1500 miles on them, $550
Any questions please feel free to ask. Would prefer local pick up on the "bigger" stuff.
Thanks, Ryan
Last edited by Free89W350; 08-19-2010 at 08:58 AM.
#4
Yes but it is for a Non IC truck and the upper rad hose is on the opposite side which makes the shroud different to a IC truck.
Thread
Thread Starter
Forum
Replies
Last Post
doublehbar
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
10-14-2015 02:17 PM
Sculpturesylvan
General Diesel Related
0
10-18-2014 10:19 PM