Various Dodge Parts
#1
12-24-2013, 11:35 AM
Various Dodge Parts
Have a batch of Dodge parts, leftovers...neither dad or I own the trucks anymore. All of this stuff is located in Mohrsville, PA (19541 zip).
NEW Cummins Campaign Lift Pump - $100
Used 2nd gen fuel filter assembly, the aluminum housing that bolts to the block and the pre-bent fuel lines - $100
Used 2nd gen unit bearings with stubs and good universals (non-ABS versions) - $150 for the pair. I think these have around 20k miles on them.
Used 3rd gen unit bearings with stubs and bad universals (from my 2004.5) - $125 for the pair. These are from my truck, and have around 67k miles on them.
NEW Napa unit bearing for a 2nd gen (non-ABS) - $80
NEW 2nd gen track bar (TRW) - $75
Used 2nd gen track bar (OE) - $50
Knuckles from a 2nd gen with spacers and splash shields - $100 for both sides
Used 2nd gen calipers - $20 for the pair
Used coil spring isolators - $20 for the pair
(Used) One complete spring pack, several main leaves, individual leaves, and overload spring pack - $100 for all of it.
Used cat/particulate filter from a 2004.5 - $200
NEW Spicer 5-806X axle universal joints for a Dana 60 - $50 for the pair.
Used 2nd gen tail lights - $40 for the pair
Used 3rd gen tail lights (off my 2004) - $40 for the pair
Used CAD unit from a 2nd gen - $50
Used output yoke from a 2nd gen 2500 - $25
Used air box from a 2nd gen and one from a 3rd gen - $25 each.
New 2nd gen (specifically for a 1999) radiator hoses - $10
Used 2nd and 3rd gen center caps - $5 each. I have both chrome and black for the 2nd gen and chrome for the 3rd gen. Also have a 3rd gen set that were cut for use with Dynatrac Hubs.
NEW bearings and stub shaft for a Dynatrac hub assembly - $150.
Prices do not include shipping. I would only consider shipping the small stuff. PM me through the forum. Will try posting pictures shortly...
---AutoMerged DoublePost---
---AutoMerged DoublePost---
NEW Cummins Campaign Lift Pump - $100
Used 2nd gen fuel filter assembly, the aluminum housing that bolts to the block and the pre-bent fuel lines - $100
Used 2nd gen unit bearings with stubs and good universals (non-ABS versions) - $150 for the pair. I think these have around 20k miles on them.
Used 3rd gen unit bearings with stubs and bad universals (from my 2004.5) - $125 for the pair. These are from my truck, and have around 67k miles on them.
NEW Napa unit bearing for a 2nd gen (non-ABS) - $80
NEW 2nd gen track bar (TRW) - $75
Used 2nd gen track bar (OE) - $50
Knuckles from a 2nd gen with spacers and splash shields - $100 for both sides
Used 2nd gen calipers - $20 for the pair
Used coil spring isolators - $20 for the pair
(Used) One complete spring pack, several main leaves, individual leaves, and overload spring pack - $100 for all of it.
Used cat/particulate filter from a 2004.5 - $200
NEW Spicer 5-806X axle universal joints for a Dana 60 - $50 for the pair.
Used 2nd gen tail lights - $40 for the pair
Used 3rd gen tail lights (off my 2004) - $40 for the pair
Used CAD unit from a 2nd gen - $50
Used output yoke from a 2nd gen 2500 - $25
Used air box from a 2nd gen and one from a 3rd gen - $25 each.
New 2nd gen (specifically for a 1999) radiator hoses - $10
Used 2nd and 3rd gen center caps - $5 each. I have both chrome and black for the 2nd gen and chrome for the 3rd gen. Also have a 3rd gen set that were cut for use with Dynatrac Hubs.
NEW bearings and stub shaft for a Dynatrac hub assembly - $150.
Prices do not include shipping. I would only consider shipping the small stuff. PM me through the forum. Will try posting pictures shortly...
---AutoMerged DoublePost---
---AutoMerged DoublePost---
Last edited by steved; 12-24-2013 at 11:35 AM. Reason: Automerged Doublepost
#2
12-24-2013, 11:45 AM
---AutoMerged DoublePost---
Again, PM me on the forum with any questions.
Last edited by steved; 12-24-2013 at 11:45 AM. Reason: Automerged Doublepost
#8
01-14-2014, 06:45 PM
Still here...
Make me an offer, the worst I'll say is no.
---AutoMerged DoublePost---
Calipers are sold!
Make me an offer, the worst I'll say is no.
---AutoMerged DoublePost---
Calipers are sold!
Last edited by steved; 01-14-2014 at 06:45 PM. Reason: Automerged Doublepost
#10
01-22-2014, 09:11 PM
Diesel Fan
do you still have the 4 wheel drive actuater housing if so i would be interested in getting that from you?
