Diesel Bombers - Various Dodge Parts

Have a batch of Dodge parts, leftovers...neither dad or I own the trucks anymore. All of this stuff is located in Mohrsville, PA (19541 zip).

NEW Cummins Campaign Lift Pump - $100

Used 2nd gen fuel filter assembly, the aluminum housing that bolts to the block and the pre-bent fuel lines - $100

Used 2nd gen unit bearings with stubs and good universals (non-ABS versions) - $150 for the pair. I think these have around 20k miles on them.

Used 3rd gen unit bearings with stubs and bad universals (from my 2004.5) - $125 for the pair. These are from my truck, and have around 67k miles on them.

NEW Napa unit bearing for a 2nd gen (non-ABS) - $80

NEW 2nd gen track bar (TRW) - $75

Used 2nd gen track bar (OE) - $50

Knuckles from a 2nd gen with spacers and splash shields - $100 for both sides

Used 2nd gen calipers - $20 for the pair

Used coil spring isolators - $20 for the pair

(Used) One complete spring pack, several main leaves, individual leaves, and overload spring pack - $100 for all of it.

Used cat/particulate filter from a 2004.5 - $200

NEW Spicer 5-806X axle universal joints for a Dana 60 - $50 for the pair.

Used 2nd gen tail lights - $40 for the pair

Used 3rd gen tail lights (off my 2004) - $40 for the pair

Used CAD unit from a 2nd gen - $50

Used output yoke from a 2nd gen 2500 - $25

Used air box from a 2nd gen and one from a 3rd gen - $25 each.

New 2nd gen (specifically for a 1999) radiator hoses - $10

Used 2nd and 3rd gen center caps - $5 each. I have both chrome and black for the 2nd gen and chrome for the 3rd gen. Also have a 3rd gen set that were cut for use with Dynatrac Hubs.

NEW bearings and stub shaft for a Dynatrac hub assembly - $150.

Prices do not include shipping. I would only consider shipping the small stuff. PM me through the forum. Will try posting pictures shortly...

---AutoMerged DoublePost---

http://i174.photobucket.com/albums/w...ps7568fde8.jpg

---AutoMerged DoublePost---

http://i174.photobucket.com/albums/w...psb2d910c8.jpg