Complete comp engine 700hp/1000tq+
#1
Complete comp engine 700hp/1000tq+
Ok im looking for a complete engine to run in my comp truck I have 2 stock Cummings from a 99 and a late 98.5 ones in my tie car running great.
I need 700hp and 1000tq, I do have a budget but I would like a reliable build. Twin turbo is fine, im currently running a 4.2td nissian.
Would change engines if need be.
Im in Australia but have a shipper in USA that all parts can be sent to.
Nos is also acceptable. However i also need it streatable for driving stages.
Other boys are running massive turbo ls1 engines that I just can't complete against. The guy to beat has a twin turbo supercharged 454
But I do want to stay diesel as my primary fuel
I need 700hp and 1000tq, I do have a budget but I would like a reliable build. Twin turbo is fine, im currently running a 4.2td nissian.
Would change engines if need be.
Im in Australia but have a shipper in USA that all parts can be sent to.
Nos is also acceptable. However i also need it streatable for driving stages.
Other boys are running massive turbo ls1 engines that I just can't complete against. The guy to beat has a twin turbo supercharged 454
But I do want to stay diesel as my primary fuel
#2
#4
I sent you a PM, we ship complete competition built engines as well as install them here. I drive a 700+ horse power Cummins as my daily driver and I am currently in the middle of building an 850+ horse power 12 valve cummins for my other truck.
It is not hard to do, you just have to do it right and it will last for years to come!
---AutoMerged DoublePost---
Here is an idea of parts included in the engines we have available, this is an engine build sheet I put together for a customer last week. This engine will be done in about 2 weeks.
Race long block includes:
Block work
Bore Hone Deckplate
.020
Coated & Champhered Mahle pistons
Recon Rods
With Heavy Duty Rod Bolts
Balanced rotating assembly at 5000 rpm's
Full line bore
Stage 1 Race cam
New lifters
New oil pump
New oil cooler
Head work includes:
5 axis CNC machined Port and polish
Fire ringed - 4.550
150 pound valve springs
ARP Head studs
12mm XXL Main gurdle
12mm P7100 pump
barrels plungers
Full cut competition delivery valves
5000rpm Governor springs
Injectors:
Bosch Race honed X4
Turbos:
Compound Silver64 over S480 with Race cover
3 piece manifold
It is not hard to do, you just have to do it right and it will last for years to come!
---AutoMerged DoublePost---
Here is an idea of parts included in the engines we have available, this is an engine build sheet I put together for a customer last week. This engine will be done in about 2 weeks.
Race long block includes:
Block work
Bore Hone Deckplate
.020
Coated & Champhered Mahle pistons
Recon Rods
With Heavy Duty Rod Bolts
Balanced rotating assembly at 5000 rpm's
Full line bore
Stage 1 Race cam
New lifters
New oil pump
New oil cooler
Head work includes:
5 axis CNC machined Port and polish
Fire ringed - 4.550
150 pound valve springs
ARP Head studs
12mm XXL Main gurdle
12mm P7100 pump
barrels plungers
Full cut competition delivery valves
5000rpm Governor springs
Injectors:
Bosch Race honed X4
Turbos:
Compound Silver64 over S480 with Race cover
3 piece manifold
Last edited by Alligator Vinny; 04-07-2011 at 05:54 PM. Reason: Automerged Doublepost
#6
Money depends a lot on shipping but I shipped one to Florida with the shipping and the cost of parts and labor it was $25,000 and makes 750 horse should last for a long time if properly cared for.
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
klein444
Chevy/GMC 6.2L and 6.5L
13
06-20-2015 11:48 PM
hershwork
Dodge Truck and Cummins Turbo Diesel Forum
5
03-01-2015 05:15 PM
metal_miner
Diesel Engine Conversions
7
12-23-2014 11:40 PM