LMM Performance Discussion of Chevy and GMC Trucks with LMM Duramax Turbo Diesel Engines Related To Performance And Longevity

stack with a 7 stage edge

Thread Tools
 
Search this Thread
 
  #1  
Old 01-08-2010, 01:41 AM
bowfishingxpres's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: texas
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default stack with a 7 stage edge

i have a 7 stage racing edge with attitude i was wondering what i can stack that with on my 08 LMM. it has a dpf delete, strait pipe from turbo back already on it. the EGR block plate on the way a banks intercooler in the mail gona upgrade intake when the funds allow it. just wondering if anyone out there has any knowledge about what i can stack with the 7 stage, thanks for any and all information.
 
  #2  
Old 01-11-2010, 08:58 PM
BriteWhiteRam's Avatar
Diesel Bomber
Join Date: Mar 2009
Location: Alberta, Canada
Posts: 1,070
Received 66 Likes on 61 Posts
Default

I personally wouldn't stack anything with it, the Edge runs injection timing as well as increased rail pressure, anything you "stack" on it will only compound that, and your gonna end up with melted pistons or cracked injectors, just not worth the risk unless you want to be rebuilding your LMM
 
  #3  
Old 01-11-2010, 10:21 PM
bowfishingxpres's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: texas
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default edge

thanks for the info man, i was just wondering if i could do it but im gettin alot of power out of it anyway
 
  #4  
Old 01-11-2010, 11:41 PM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

That Edge should be more than enough to trash your stock transmission
 
  #5  
Old 01-12-2010, 12:28 AM
FastCR's Avatar
Diesel Bomber
Join Date: Aug 2007
Location: Livingston Montana
Posts: 1,525
Received 79 Likes on 66 Posts
Default

Originally Posted by lukesdiesel
That Edge should be more than enough to trash your stock transmission
x2. after that you should be looking at efi live. and maybe some dual fuelers.
 
  #6  
Old 01-13-2010, 01:16 AM
bowfishingxpres's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: texas
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default 7 stage

i looked at the efi live it its too hard to find info on it off the net besides from people there site doesnt say alot like power increases an things to that sort. and i dont want twins on my truck id rather have 1 big one than 2 lil ones tryin to keep up
 
  #7  
Old 01-13-2010, 06:16 AM
RTanner's Avatar
Newbie
Join Date: Jan 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bowfishingxpres
i looked at the efi live it its too hard to find info on it off the net besides from people there site doesnt say alot like power increases an things to that sort. and i dont want twins on my truck id rather have 1 big one than 2 lil ones tryin to keep up
efi is hands down the best custom tuning option, however its not for everyone, some people just want a canned tuner. As far as twins a stock lmm engine is only safe to around 650rwhp give or take, and twins are the safer way of makin power, and are alot more drivable on the street. One big turbo takes longer to light so if your racin on the street it will lag alot more
 
  #8  
Old 01-13-2010, 06:15 PM
bowfishingxpres's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: texas
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default edge

well my lmm hasnt had any trouble spankin a few cummins asses . my dad raced a cobra mustang in it an it beat him with no trouble. my 1 big turbo is windin up pretty good so far for me. i would like the efi system but the edge is performing very well for me an i havnt tore anything up yet but now that i have 37s on my truck im feelin sumtins gona break anyday
 
  #9  
Old 01-13-2010, 09:59 PM
BriteWhiteRam's Avatar
Diesel Bomber
Join Date: Mar 2009
Location: Alberta, Canada
Posts: 1,070
Received 66 Likes on 61 Posts
Default

your probably right, and it will more than likely be your Tranny

the stock LMM turbo is actually relatively small compared to some of the aftermarket offerings, and it is a Variable Nozzle Turbocharger or Variable Geometry Turbocharger, and it can open and close a set of vanes inside the drive side of the turbo to allow for quicker spool up, and more flow at WOT

a Big Single straight vane turbo will take forever to spool, and it wont be very streetable

a set of compounds uses a smaller charger like your stock VGT and another turbo that is much larger so still have the benefits of the stock turbos quick spool, and the big turbos large amount of boost... In essence the small turbo gets things moving and the large turbo keeps them moving, a set of compounds will out do a big single for almost any application except for say certain classes in sled pulling where they are only allowed single turbos of a specific inducer size

Another option may be using the stock turbo as well as a Centrifugal Supercharger, i know that one company is offering a kit for the LMM, and it is very streetable/workable
 
  #10  
Old 01-14-2010, 12:02 AM
bowfishingxpres's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Location: texas
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

that sounds like something to definitly keep in mind for my lmm. i did some looking at twins and just wasnt sure i wanted to tackle something like that for it ive always heard they work hard an boost alot real fast but it seems like when you boost up hard an fast you lose some grunt puts too much power out to fast i guess is what im saying. i would like to stay with a nice single and just slowly get my truck to were i want it power wise but i may be done with it once i get efi live, atleast for a wile my truck performs great now cant wait to see the efi live in action now that i have done some talking to people that know about it, i was completly ignorant of it until a few days ago as far what it does and what its capable of
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
justinsbeck
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
01-18-2016 12:15 AM
Kfohne21
For Sale
0
12-23-2014 04:17 PM
somarillw
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
12-08-2014 09:07 PM
CumminsCrazed
5.9L 24V Performance
5
10-27-2014 09:02 PM



Quick Reply: stack with a 7 stage edge



All times are GMT -5. The time now is 10:13 PM.