ok guys, im just kinda curious if anyone knows how much power is added with the COMP in EZ mode (pump wire NOT tapped)

Also, if anyone has dyno results of their truck with COMP turned on and turned off to see how much power is created at the rear wheels compared to the advertised 120hp on the box. Would like this to be on otherwise stock truck except for intake and exhaust maybe. My mods are in sig.

---AutoMerged DoublePost---

anyone?

 

Hey Zach, I think it's 75 or so. Tap the damn pump already!!!

 

Courtesy of Edge:

Power Level 1 on the Comp is the same as the EZ; on Power Levels 2-5 additional power is added via the wire tap onto the injection pump. If the pump wire is not attached with a Comp, Levels 2-5 are still operational, but the power gain is not any higher than Level 1. Under this scenario, however, power will come on much earlier in the throttle


So power level 1, the same as the EZ is 65hp and 185 ft lbs of torque. No dyno, but I can tell you its a big seat of the paints difference in between a Edge EZ and a Comp on 5x5.

 

1st run Comp on 5x5
2nd run Comp on 5x5, but the TC was slipping at this point.
3rd run Comp on 4x5 I think.

I had a stock tranny with a shift kit, BHAF, and stacks.

 

Also I forgot to add this dyno was BEFORE I had the Drag/Hot upgrade done.