Diesel Bombers

Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

ICP related issue.

   
Old Jun 16, 2012 | 06:44 PM
Share
  #1  
svt28640's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 183
Likes: 1
From: Mountains
Default ICP related issue.
My truck when you start it lopes an throttle pedal is unresponsive.. Unplug the icp its fine.. Replaced the icp sensor... twice... new hpop, lines, ipr, cps, fresh oil. Any ideas?
 
Reply
0
Old Jun 16, 2012 | 07:14 PM
Share
  #2  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default
It drives fine with the ICP unplugged?
 
Reply
0
Old Jun 16, 2012 | 07:36 PM
Share
  #3  
svt28640's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 183
Likes: 1
From: Mountains
Default
yes
 
Reply
0
Old Jun 16, 2012 | 09:27 PM
Share
  #4  
Fourwheelrevolver87's Avatar
Diesel Fan
Joined: Mar 2012
Posts: 58
Likes: 1
From: northern illinois
Default
I would check the engine wiring harness...sounds like an electrical issue to me. Check the icp and ipr well for any rubbed, melted or broken wires.

---AutoMerged DoublePost---

Is your truck chipped or have a programmer? Do you have acess to a scan tool?
 
Last edited by Fourwheelrevolver87; Jun 16, 2012 at 09:27 PM. Reason: Automerged Doublepost
Reply
0
Old Jun 17, 2012 | 02:41 AM
Share
  #5  
svt28640's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 183
Likes: 1
From: Mountains
Shut Mouth
Yes its chipped ts 6 pos and it does it with chip out. An yes I have snap on scan tool
 
Reply
0
Old Jun 17, 2012 | 08:34 AM
Share
  #6  
Fourwheelrevolver87's Avatar
Diesel Fan
Joined: Mar 2012
Posts: 58
Likes: 1
From: northern illinois
Default
On the datastream with the icp plugged in what is the icp psi reading? Unplugged icp should read about 700psi...
 
Reply
0
Old Jun 17, 2012 | 03:02 PM
Share
  #7  
svt28640's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 183
Likes: 1
From: Mountains
Default
It will not run plugged in
 
Reply
0
Old Jun 17, 2012 | 09:32 PM
Share
  #8  
Fourwheelrevolver87's Avatar
Diesel Fan
Joined: Mar 2012
Posts: 58
Likes: 1
From: northern illinois
Default
It will not run at all plugged in? Did you check out all of the wiring?

---AutoMerged DoublePost---

Do you have a cel/ses? Any codes?
 
Last edited by Fourwheelrevolver87; Jun 17, 2012 at 09:32 PM. Reason: Automerged Doublepost
Reply
0
Old Jun 19, 2012 | 08:21 AM
Share
  #9  
svt28640's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 183
Likes: 1
From: Mountains
Default
Only has codes when icp is unplugged
 
Reply
0
Old Jun 25, 2012 | 12:39 PM
Share
  #10  
Fourwheelrevolver87's Avatar
Diesel Fan
Joined: Mar 2012
Posts: 58
Likes: 1
From: northern illinois
Default
Did you figure anything out with your icp issue? Find any rubbed, broken or shorted wires?
 
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 07:55 PM.