ICP related issue.
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 183
Likes: 1
From: Mountains
ICP related issue.
My truck when you start it lopes an throttle pedal is unresponsive.. Unplug the icp its fine.. Replaced the icp sensor... twice... new hpop, lines, ipr, cps, fresh oil. Any ideas?
Diesel Fan
Joined: Mar 2012
Posts: 58
Likes: 1
From: northern illinois
I would check the engine wiring harness...sounds like an electrical issue to me. Check the icp and ipr well for any rubbed, melted or broken wires.
---AutoMerged DoublePost---
Is your truck chipped or have a programmer? Do you have acess to a scan tool?
---AutoMerged DoublePost---
Is your truck chipped or have a programmer? Do you have acess to a scan tool?
Last edited by Fourwheelrevolver87; Jun 16, 2012 at 09:27 PM. Reason: Automerged Doublepost
Diesel Fan
Joined: Mar 2012
Posts: 58
Likes: 1
From: northern illinois
It will not run at all plugged in? Did you check out all of the wiring?
---AutoMerged DoublePost---
Do you have a cel/ses? Any codes?
---AutoMerged DoublePost---
Do you have a cel/ses? Any codes?
Last edited by Fourwheelrevolver87; Jun 17, 2012 at 09:32 PM. Reason: Automerged Doublepost
