7.3 no start
#1
7.3 no start
Ok so Ive done all I can think of and searched and searched and couldn't come up with the next thing to check . So here is what I have 2000 7.3 wont start pulling codes p1280,p1000,p0603,pp1266(aftermarket security system) It has a new two new battery's, CPS and IDM. I get the wait to start light and while cranking i get no RPMs. It cranks over strong it should show RPM but it doesn't Any suggestion on what to check? I have checked all the fuses. Also I am getting a very strong smell (smell like either burning) when cranking but no smoke at all.
#2
#3
I think I found my problem. I have done the mentioned above. The excursion has 120k on it and is in a heated shop temp around 70 degrees. The security code that it is showing has the engine disabled from starting. The provious owner had the column apart because of a broken ingnition switch rod. When I reassemble the column I noticed the ring that goes around the tumbler was broke. Didnt think anything of it so I ordered a new one and will be here tomarrow sometime.
Thread
Thread Starter
Forum
Replies
Last Post
Bigredpowerstroke
Ford Powerstroke 94-98 7.3L
2
08-14-2015 10:31 AM
Domrig13
General Diesel Related
0
12-12-2014 01:24 PM