Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

00' 7.3 died and wont start

Thread Tools
 
Search this Thread
 
  #1  
Old 12-09-2011, 01:48 AM
IKU's Avatar
IKU
IKU is offline
Newbie
Thread Starter
Join Date: Sep 2011
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 00' 7.3 died and wont start

My 00' 7.3 randomly shut off making a left turn no popping or sputtering, just died. It has fuel pressure, wait to start light comes on etc tach doesn't move though, changed in three cps. icp and ipr. still nothing and no tach movement.

Ive changed the oil and filled the hpop the tach still is not moving while cranking the hpop stays full now though.
 
  #2  
Old 12-09-2011, 02:26 AM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default

Any codes?

Luke
 
  #3  
Old 12-09-2011, 11:23 AM
The hosser's Avatar
Diesel Enthusiast
Join Date: Oct 2011
Location: Denver, Colorado
Posts: 236
Received 10 Likes on 5 Posts
Default

What mods do you have done?
 
  #4  
Old 12-09-2011, 11:47 AM
dcadwell's Avatar
Diesel Fan
Join Date: Oct 2011
Location: Elko GA.
Posts: 22
Received 0 Likes on 0 Posts
Default

Disconnect the ICP and try it. This sends a fault code to raise the injector oil pressure. Check to make sure you have 3 to 5 volts going to the ICP and 3/4 to 1 volt coming from it.
 
  #5  
Old 12-09-2011, 12:45 PM
DieselDanBoy's Avatar
Diesel Wrench
Join Date: Sep 2009
Location: Torrington CT
Posts: 574
Received 28 Likes on 28 Posts
Default

im wondering if something came loose under your dash. you said it shut off taking a left turn, have you ever done any wiring under the dash? 00's usually when your cam sensor goes bad, your tach wont move while cranking (because its not reading anything). with that new sensor in there you should get something. have you checked all your connections in the harness up the the pcm?

also if you have a tuner piggy backed on the pcm, if it came loose (i know dp tuners and ts chips do) it pretty much shuts the truck off and youll get nothing for guage movements no matter what you do

---AutoMerged DoublePost---

also getting some codes out of it would help tremendously
 

Last edited by DieselDanBoy; 12-09-2011 at 12:45 PM. Reason: Automerged Doublepost
  #6  
Old 12-11-2011, 06:13 PM
POWERSTROKEMANIAC's Avatar
Diesel Enthusiast
Join Date: May 2011
Location: Morristown TN
Posts: 142
Likes: 0
Received 3 Likes on 3 Posts
Default

check engine light on? any mods on the truck?
 




All times are GMT -5. The time now is 11:42 AM.