Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

Turbo Pedestal Leaking Oil

Old Nov 17, 2011 | 02:40 PM
  #1  
woody01234's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2011
Posts: 10
Likes: 0
From: MN
Default Turbo Pedestal Leaking Oil

I have been having oil leaking out of the bell housing. I know that it is not likely the rear seal. Most times it is something within the valley, then draining to the bell housing at the rear of the valley.

Anyway, after cleaning and scrubbing the engine many times in attempt to find the oil leak, I finally found out that the oil leak is from between the turbo and pedestal.

My question, finally, has anyone ever replaced these o-rings? And if so, how big of a task is it?
 
Reply
Old Nov 17, 2011 | 05:34 PM
  #2  
fordornothing's Avatar
Diesel Bomber
Joined: Jul 2010
Posts: 3,884
Likes: 144
From: Hays, KS
Default

not horrible. just time consuming. there are 2 o rings between the block and pedistol and 2 o rings between the pedistol and turbo. spray a good penetrating oil on the clamp holding the "Y" pipe collector to the exhaust housing on the back of the turbo.
 
Reply
Old Nov 18, 2011 | 09:28 AM
  #3  
woody01234's Avatar
Thread Starter
|
Diesel Fan
Joined: Nov 2011
Posts: 10
Likes: 0
From: MN
Default

Thanks,

I should be able to handle it.
 
Reply
Old Nov 29, 2011 | 12:30 PM
  #4  
Peterbilt387X's Avatar
Diesel Fan
Joined: Aug 2011
Posts: 35
Likes: 1
From: Hinckley, OH
Default

If you haven't already done so, I would suggest doing everything possible back there (if you got the extra cash of course) - 4" downpipe, new clamps, new intercooler boots (or clean them very good), Wicked Wheel (or similar), AIH delete plug, non-EBPV pedestal (the stock pedestal leaks at the actuator arm), high-flow exhaust outlet, and CCV. Then you won't have to mess with it again 'cuz it hurts your knees like crazy. I replaced them o-rings twice before realizing I should have done it all the first time. It was costly but I shouldn't have to work in that cramped spot for awhile.
 
Reply
Old Nov 29, 2011 | 05:36 PM
  #5  
fordornothing's Avatar
Diesel Bomber
Joined: Jul 2010
Posts: 3,884
Likes: 144
From: Hays, KS
Default

why would you put in a WW unless you have a surge problem?
 
Reply
Old Nov 29, 2011 | 08:00 PM
  #6  
CMCA Swartzkrautheim's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 293
Likes: 5
From: Sterling Hgts MI
Default

^^ i agree, no ww unless u need it cus it drops you surge line by flowing less air thats one thing i would change about my E99 :-(
 
Reply
Old Nov 29, 2011 | 08:06 PM
  #7  
fordornothing's Avatar
Diesel Bomber
Joined: Jul 2010
Posts: 3,884
Likes: 144
From: Hays, KS
Default

the e99 has a WW from the factory... i still have surge. to bad you can't get a ported compressor housing...
 
Reply
Old Nov 29, 2011 | 08:14 PM
  #8  
CMCA Swartzkrautheim's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 293
Likes: 5
From: Sterling Hgts MI
Default

yea i havnt hit enough hills with a big load too have any surge YET anyways... but yea id like to get an aftermarket fix for more flow anyways...
 
Reply
Old Nov 29, 2011 | 08:44 PM
  #9  
Peterbilt387X's Avatar
Diesel Fan
Joined: Aug 2011
Posts: 35
Likes: 1
From: Hinckley, OH
Default

Well, most diesel guys add sum type of programmer for a bit more power. I mean, driving a 7.3L on a stock setting is sluggish, especially after you see what these motors can do. And most programmers are going to cause surge. But to each their own, it was just my two cents. My apologies.
 
Reply
Old Nov 29, 2011 | 09:59 PM
  #10  
CMCA Swartzkrautheim's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 293
Likes: 5
From: Sterling Hgts MI
Default

ive only got a hypertech so maybe thats y i havnt had it yet... maybe it defuels b4 it can surge???
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:40 AM.