I guess the flutter was not normal LOL
#11
I pulled the IDM out and was hoping to find some corroted pins but they seem alright looks like them installed dielectric grease to the pins and some of the grease seemed discolored (yellow) I'm guessing some moisture got to it. Anyways long story short I'm going to put it back together try to fire it and if that don't work go after the uvc's next. If that don't work I'm stuck, I'll have to find a trailer so I can get it up there.
#12
#13
Hey that would be really cool. I have made plans to take some of my football team to the drag boat races this Saturday, are you still going to be here until thanksgiving because next weekend is payday and I would like to pay for your gas plus I would like to be able to throw a little money at it so I'm am not wasting your time. Let me know what works for you. Thanks.
#15
#17
Hey that would be really cool. I have made plans to take some of my football team to the drag boat races this Saturday, are you still going to be here until thanksgiving because next weekend is payday and I would like to pay for your gas plus I would like to be able to throw a little money at it so I'm am not wasting your time. Let me know what works for you. Thanks.
#18
The following users liked this post:
Jeff Davis (11-06-2010)
#19
Pulled the valve covers off and found that the #2 injector is puking oil out of the deflector sheild while cranking over the motor and the rest are not which is leaving the hpop system open and not allowing the hpop system to build more than 100 psi in return will not allow the pcm to let the injectors do the intial fire. can I rebuild these injectors or only replace them? whats the cost for the special tools compared to buying a new injector?
#20
Pulled the valve covers off and found that the #2 injector is puking oil out of the deflector sheild while cranking over the motor and the rest are not which is leaving the hpop system open and not allowing the hpop system to build more than 100 psi in return will not allow the pcm to let the injectors do the intial fire. can I rebuild these injectors or only replace them? whats the cost for the special tools compared to buying a new injector?
Check e-bay... sometimes you can get a used set for about $200-$300 and then have some others to get modded when the HP bug bites!
I do not mess with PSD injector internals... No thank you!
Here is a video of what I was talking about on sunday... You can see the oil coming out of the bottom of the injector body...
Thats all it takes to have a no start situation.
Last edited by CSIPSD; 11-08-2010 at 10:58 AM.