Fuel Bowl Delete
#1
#5
Heres the link to where I found it hopefully it works Riffraff Diesel: Fuel Rail Crossover I also found a hose made to balance the oil pressure between the heads. Does any of these parts seem worth it?
#6
#7
the oil cross over will help out with idle noise and also performance because from the factory the oil pressure is only being read from one oil rail. when you link the two together your getting a more accurate reading of the pressures in the rails and your not getting all the pressure drop so in turn the icp sensor is getting a more accurate reading which in turn will allow for more pressure to be created by your tuner and also doesnt make your pump work as hard to keep up. if that makes sence i put it on mine and i was able to monitor the pressures and there wasnt as much fluxuation and for $40 or $50 bucks it cant hurt
#8
the oil cross over will help out with idle noise and also performance because from the factory the oil pressure is only being read from one oil rail. when you link the two together your getting a more accurate reading of the pressures in the rails and your not getting all the pressure drop so in turn the icp sensor is getting a more accurate reading which in turn will allow for more pressure to be created by your tuner and also doesnt make your pump work as hard to keep up. if that makes sence i put it on mine and i was able to monitor the pressures and there wasnt as much fluxuation and for $40 or $50 bucks it cant hurt
The HPO X over also does nothing for performance... It amounts to an engineered oil leak... I have one, and if it ever leaks again it will go in the trash and the plugs back in. Did nothing.
#9
#10