banks six computer chip
#1
banks six computer chip
i have a 99 powerstroke i have a 1805 flash paq programer on it and im looking at putting a banks six gun computer chip in it, is it worth the 500 to have it burnt for my truck and have it installed???? im woundering if its basically the same thing i have or if it worth the price????? will it give me more fuel millage and power than what i have with alil bit of smoke? im not wanting alot of it jus a wee bit.
#2
i have a 99 powerstroke i have a 1805 flash paq programer on it and im looking at putting a banks six gun computer chip in it, is it worth the 500 to have it burnt for my truck and have it installed???? im woundering if its basically the same thing i have or if it worth the price????? will it give me more fuel millage and power than what i have with alil bit of smoke? im not wanting alot of it jus a wee bit.
Anything Banks on the 7.3 is junk. Dont waste your money.
Contact Bill or Corey at Power Hungry Performance, get a 6 pos chip from them and have more power, better milage, better smoke control and better shifting.
You can not stack a "chip" and a "programer" on a 7.3. The Chip will overide anything on the PCM (your programer)... And its not worth it to even try.
The following users liked this post:
99stackedpowerstroke (05-11-2010)
#4
#5
how much ur fuel mialage go up? does it add enough power for your likings? i pull gravity wagons and car trailers with cars pretty often so will it do good with me doin this stuff?
---AutoMerged DoublePost---
ive also just heard bout ts 6 position chip for 275, are they any good with there products? has anybody used these before?
---AutoMerged DoublePost---
ive also just heard bout ts 6 position chip for 275, are they any good with there products? has anybody used these before?
Last edited by 99stackedpowerstroke; 05-11-2010 at 04:47 PM. Reason: Automerged Doublepost
#6
how much ur fuel mialage go up? does it add enough power for your likings? i pull gravity wagons and car trailers with cars pretty often so will it do good with me doin this stuff?
---AutoMerged DoublePost---
ive also just heard bout ts 6 position chip for 275, are they any good with there products? has anybody used these before?
---AutoMerged DoublePost---
ive also just heard bout ts 6 position chip for 275, are they any good with there products? has anybody used these before?
You can get the TS chip from the flebay vendor, but its got generic tunes on it, which will be better then you have, but not near as good as a well tuned chip from one of our vendors.
Give Bill and Corey a call, you will not be disappointed.
The following users liked this post:
99stackedpowerstroke (05-12-2010)
#10
The following users liked this post:
99stackedpowerstroke (05-12-2010)