I got a 2001 ford and it wont start replaced the camshaft sensor and there is no fuel leak cleaned the Exhaust Back pressure line so the only thing is I don't know what's next my map sensor is reading 90-97 is that to much or to little

 

whats your fuel pressure your hpop pressure all those are considerations

 

this needs to get real close to 450 on the scanner before it will start. First thing is scanner on it while cranking to check this. If you do not have a scanner then go ahead and pull the plug on the upper high pressure oil pump housing.... Make sure the oil level is not more then one inch below the plug. If it is too low. fill with oil and it will more than likely start.... somethings to try......