Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

turbo isnt working

Old Nov 2, 2009 | 12:37 PM
  #1  
royslsbry's Avatar
Thread Starter
|
Newbie
Joined: Nov 2009
Posts: 3
Likes: 0
Default turbo isnt working

I have a 2000 f350 with a 7.3 and the turbo isn't working. i dont have a check engine light on i have checked the turbo it is still turning and looks alright. i dont have any exhaust leaks and the truck doesn't smoke. the truck runs fine other than the turbo doesnt kick in any suggestions?
 
Reply
Old Nov 2, 2009 | 02:23 PM
  #2  
Whit's Avatar
Site Mascot
Joined: Mar 2007
Posts: 16,010
Likes: 940
From: Why-homing
Default

if its still turning and ya have no smoke then its prolly fine

more detail please
 
Reply
Old Nov 2, 2009 | 02:58 PM
  #3  
royslsbry's Avatar
Thread Starter
|
Newbie
Joined: Nov 2009
Posts: 3
Likes: 0
Default

the truck doesnt have any power and you dont hear the turbo kick in
 
Reply
Old Nov 3, 2009 | 09:49 PM
  #4  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Originally Posted by royslsbry
I have a 2000 f350 with a 7.3 and the turbo isn't working. i dont have a check engine light on i have checked the turbo it is still turning and looks alright. i dont have any exhaust leaks and the truck doesn't smoke. the truck runs fine other than the turbo doesnt kick in any suggestions?
Originally Posted by royslsbry
the truck doesnt have any power and you dont hear the turbo kick in

I moved your thread down here where it will get a bit more exposure...


Check all your boots, from the turbo to the intercooler, and from the intercooler to the Y pipe... Also check the boots under the Y pipe.

Also check to make sure the MAP sensor is hooked up on the Y pipe as well.
 
Reply
Old Nov 7, 2009 | 07:39 PM
  #5  
4x4_Welder's Avatar
Diesel Fan
Joined: Oct 2009
Posts: 85
Likes: 3
From: Rexburg, ID
Default

Have you checked for codes?
Check for any restriction in the exhaust, plugged air filter, etc.
 
Reply
Old Nov 8, 2009 | 09:38 PM
  #6  
royslsbry's Avatar
Thread Starter
|
Newbie
Joined: Nov 2009
Posts: 3
Likes: 0
Default

no exhaust restriction and no codes
 
Reply
Old Nov 9, 2009 | 01:47 PM
  #7  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Originally Posted by CSIPSD
I moved your thread down here where it will get a bit more exposure...


Check all your boots, from the turbo to the intercooler, and from the intercooler to the Y pipe... Also check the boots under the Y pipe.

Also check to make sure the MAP sensor is hooked up on the Y pipe as well.
Originally Posted by royslsbry
no exhaust restriction and no codes

Did you see these questions... check EACH boot, feel it for tears or blisters...

Also, is there a loud hiss sound from the exhaust?
 
Reply
Old Dec 1, 2009 | 12:53 PM
  #8  
pepe's Avatar
Newbie
Joined: Nov 2009
Posts: 4
Likes: 0
Default

sounds like exhaust back pressure sensor/valve.that same valve is what the 7.3 uses to help the engine warm up.you can also get an exhaust brake from ford that gives you manual operation of that valve.those valves can get gummed up,when they do it's like driving with the brakes on,plus it will hiss out the exhaust.
 
Reply
Old Dec 3, 2009 | 09:57 AM
  #9  
autofabricator's Avatar
Diesel Fan
Joined: Feb 2009
Posts: 45
Likes: 0
Default

you could aslo check to make sure the waste gate is not stuck open.
 
Reply
Old Dec 3, 2009 | 07:44 PM
  #10  
coldair's Avatar
Diesel Fan
Joined: Jul 2007
Posts: 10
Likes: 0
Default

no power could be from no fuel pressure. you need a boost gage or a scanner that can read live data to see what your boost is
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:26 AM.