Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

Idles then dies

Old May 30, 2016 | 08:22 PM
  #1  
Ford78's Avatar
Thread Starter
|
Newbie
Joined: May 2016
Posts: 5
Likes: 0
Default Idles then dies

2000 excursion 7.3 problem started yesterday was driving along and it died but fired right back up did this 6 times and was fine got home changed cps and drove it today about 20 miles and died and would not restart would crank and fire up but immediately dies after sitting for 2 hours it would start and idle if I touched the throttle it would die and would not restart after sitting for an hour it will idle for 20 seconds and die while idling runs rough but after it dies it will not restart till it sits for awhile I am puzzled any help is much appreciated thanks
 
Reply
Old May 30, 2016 | 10:41 PM
  #2  
joebob3093's Avatar
Moderator
Joined: Jul 2008
Posts: 2,558
Likes: 138
From: Powell Butte, OR
Default

does it do it when its cold and hot?
 
Reply
Old May 30, 2016 | 10:48 PM
  #3  
Ford78's Avatar
Thread Starter
|
Newbie
Joined: May 2016
Posts: 5
Likes: 0
Default

It would not restart at all while it was hot but once it cooled down it'll start and idle for a couple seconds and die
 
Reply
Old May 31, 2016 | 12:40 AM
  #4  
joebob3093's Avatar
Moderator
Joined: Jul 2008
Posts: 2,558
Likes: 138
From: Powell Butte, OR
Default

kinda sounds like an IPR issue but you need to get a scanner on it
 
Reply
Old May 31, 2016 | 06:06 AM
  #5  
Ford78's Avatar
Thread Starter
|
Newbie
Joined: May 2016
Posts: 5
Likes: 0
Default

I have an SCT tuner in my super duty I used it to check the codes I can't remember what they are right off hand I'll post them when I get a chance
 
Reply
Old Jun 1, 2016 | 04:42 PM
  #6  
Ford78's Avatar
Thread Starter
|
Newbie
Joined: May 2016
Posts: 5
Likes: 0
Default

Codes are p1280 and p1670
 
Reply
Old Jun 1, 2016 | 08:06 PM
  #7  
Ford78's Avatar
Thread Starter
|
Newbie
Joined: May 2016
Posts: 5
Likes: 0
Default

Had a scanner put on it the guy said it pulled a code that the chip in my key was bad? Is this possible would that really keep it from starting
 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:03 PM.