skipping issue
#1
skipping issue
i have an early 99 f250 6 speed i have a pretty steady skip i used a temp gun i found i have both 2 front cylinders on the passanger bank that are cold i bought it like this, now im thinking uvch so i got one, my question is is there anyway to check the injectors while i have it apart?
i also get no codes
i also get no codes
#2
#4
Install the injectors, making sure to lube them liberally first... Do not hook up the electrical for them. Torque them in place... Pull those glow plugs for those cylinders and spin the motor over... Make sure to have your valve covers back in place with a two bolts, top and bottom to stop the fluids from hitting your shop wall.. Then put the glow plugs back in, connect everything, put vc's back on and start cranking on her...
#5
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
10-23-2014 08:10 AM
Diesel Bombers
General Diesel Related
0
10-08-2014 08:10 AM