Tranny Problems
#22
its actually quite noticable haha. And no, it does it all the time! the only time it'll stop is when you push in on the clutch.
I dont think it's the throwout bearing, because that's not being used nor is it spinning when the clutch is engaged. the pilot bearing shouldnt be spinning when the clutch is engaged either, the only time you should hear that is when the clutch is disengaged when it starts spinning.
my guess is input shaft bearing
I dont think it's the throwout bearing, because that's not being used nor is it spinning when the clutch is engaged. the pilot bearing shouldnt be spinning when the clutch is engaged either, the only time you should hear that is when the clutch is disengaged when it starts spinning.
my guess is input shaft bearing
#23
Hmmmm that is strange. Before i put more fluid in and i would decelorate down a hill in 4th gear it would whine pretty good and same with 5th but it was mostly at lower rpms and when im goiong down the road about 65 i can hear a very faint whine but its just one of those sounds that make you go nuts
---AutoMerged DoublePost---
let me add the sound goes away too when i push the clutch in
---AutoMerged DoublePost---
let me add the sound goes away too when i push the clutch in
Last edited by 97t444e; 03-05-2012 at 11:04 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post