Well after finding the first leak i have found another.the pump is leaking out the weep hole so im gunna replace it but was wondering if there was a tutorial with pics on how todo it.from what iv herd its gunna be a pain in the a$$

 

EASY.

Remove the fuel bowl at the same time...it makes the job a snap.

Really, there are only 4 bolts that need to be taken out plus the big banjo bolt at the rear of the pump. 1 1/4 wrench for that. Hope you have small hands......

The two bolts for the fuel bowl are 13mm. There is a harness connector there as well as the drain valve hose.

The two bolts for the pump are 10mm and there are three hoses....but you can replace those while you're in there so just cut them off. You will need three short sections of 3/8" hose and one short section of 5/16 hose (by short section, I'm talking about 2.5"-3").