Head Gaskets
#1
Head Gaskets
I am going to remove my heads to install new valve springs and to inspect the top end of the engine.
Here is my question Which head gaskets are the best.
Ford, they want $120 each for them
International, they want $95 each
Then I went to the local parts store and asked for Fle-Pro and they were only $28 a set.
What gives, With pushing between 60 to 70 PSI of boost which head gasket do I want to run?? Don't much care how much as long as they last.
Can any one shed any light on this??
Here is my question Which head gaskets are the best.
Ford, they want $120 each for them
International, they want $95 each
Then I went to the local parts store and asked for Fle-Pro and they were only $28 a set.
What gives, With pushing between 60 to 70 PSI of boost which head gasket do I want to run?? Don't much care how much as long as they last.
Can any one shed any light on this??
#4
#5
I am going to set my wast gates to about 50psi. If I can ease into it then the wast gates will hold the boost at 50, If I just jump on it thats when I have seen bost to the 60psi mark.
I was not going to install fire rings untill I plain on running over 70psi of boost. I don't want to do that untill I can install my other turbos. Thats when I will fire ring the heads and other needed mods.
I was not going to install fire rings untill I plain on running over 70psi of boost. I don't want to do that untill I can install my other turbos. Thats when I will fire ring the heads and other needed mods.
#6
#7
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
TheMacster
5.9L 24V Performance
2
04-14-2015 07:01 PM
klein444
6.2L & 6.5L Performance
7
04-14-2015 09:04 AM
Hardcorefx4
Ford Powerstroke 03-07 6.0L
4
10-06-2014 07:47 PM