96 ambulence water pump help
#1
96 ambulence water pump help
Howdy, I need help asap getting the fan off the water pump housing on a 96 7.3 ambulance(took out the belt as well,. and i need the help asap as this is our main response rig on our dept). Right now I have the rad and fan shroud out along with all the hoses and the t-stat. All that is left is the fan. Anyhting else i should know before i work on this any more? I for the life of me cannot figure out how to remove the fan. Oh and being a newbie on this forum, i did search but it would not load so please forgive.
Josh
Josh
#2
Their is a specialty tool for removing the fan. The fan is held on my one big nut. You will want to get a new fan belt to hold things tight while you try and get the fan off. you can also use a impact but i really don't recomend it or it will look like teh nut on mine ...mangled... The only way i could get the fan off mine was pull the waterpump and weld a large nut to the nut and a steel bar to the impeller... No offence but if this is a emergency veh and its you first responce veh why not take it to a profecional to get the work done you have peoples lives in your hands their bud if you do something wrong
Thread
Thread Starter
Forum
Replies
Last Post
klein444
Chevy/GMC 6.2L and 6.5L
3
03-08-2015 08:19 AM
Lawrence D. Sanders Sr
5.9 Liter CR Dodge Cummins 03-07
3
12-16-2014 11:52 PM
mpcampers
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
12-04-2014 08:24 PM