Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

intake elbow.

Thread Tools
 
Search this Thread
 
Old Mar 18, 2010 | 09:20 AM
  #1  
powerstroke250's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2010
Posts: 36
Likes: 1
From: milwaukee wisconsin
Default intake elbow.

so the part that goes from the turbo to the intake, its red its 3.5 inches to 4 inch its about 6 inches long wore out on my truck. i have a 96 powerstroke. and i cannot find that part anywhere. does anyone have any ideas on what i can do or know of a place that i can get this part? ive tried nearly everything from dealerships to parts stores. any help???
 
Reply
Old Mar 18, 2010 | 09:58 AM
  #2  
Lange503's Avatar
Diesel Bomber
Joined: Feb 2010
Posts: 1,058
Likes: 45
From: Vernal, Utah
Default

a new intake would replace that? S&B makes one for about 270 bucks thats pretty good. or you could just get some PVC pipe
 
Reply
Old Mar 18, 2010 | 05:26 PM
  #3  
CSIPSD's Avatar
Diesel Bomber
Joined: Sep 2007
Posts: 7,638
Likes: 638
From: Bend OR
Default

Wrecking yard.... FORD... they will both carry the part. A aftermarket intake would not replace this part.
 
Reply
Old Apr 8, 2010 | 06:55 PM
  #4  
95rick's Avatar
Newbie
Joined: Mar 2009
Posts: 5
Likes: 0
From: PRB, WY
Default

That elusive hose can be had here !!
Silicone 45 Degree Reducing Elbow 3-3/8" to 3" 1820102C2: Intake Hoses, IntakeTubing, and Intake Clamps
 
Reply
Old Apr 8, 2010 | 11:32 PM
  #5  
yeehaw's Avatar
Diesel Enthusiast
Joined: Dec 2009
Posts: 174
Likes: 9
From: waukesha, wi
Default

there is a few good junkyards in milwaukee, last time we were at Als they had nothing for powerstroke stuff, try sullivan too they have a good selection, or else yea right to ford, prolly call safro in ocon. or griffen in wauk. not sure what soreans carrys, or else try lakeside on hwy 100 and silver spring
 
Reply
Old Apr 9, 2010 | 09:16 AM
  #6  
twinboys's Avatar
Diesel Wrench
Joined: May 2009
Posts: 508
Likes: 17
From: Minnesota
Default

Too many things can be called "intake". Everything from the air filter, to the turbo, through the spYder??, through the intercooler, back to the spIder, down to the part bolted to the engine, for which I personally have chosen the name plenum.

I believe you are not talking about one of the two hoses between the spyder and the plenums.

I do believe you are talking about the nonlinear hose attached to the turbo inlet that increases in diameter to 4". If you are, The orange ones are obsolete and you need the updated kit that includes the aluminum center section. part # F7TZ-9C681-AA. try Powerstrokeshop.com @$100. or your Ford dealer. or junk yard.
 
Reply
Old Apr 9, 2010 | 01:22 PM
  #7  
cummins bronco's Avatar
Diesel Enthusiast
Joined: Feb 2010
Posts: 206
Likes: 11
From: Armstrong BC Canada
Default

you could always try a big truck shop
i got one from the local international dealer, i had to shorten it up a bit, but it was cheap and much easier to find than a direct fit piece.
 
Reply
Old Apr 12, 2010 | 10:09 AM
  #8  
powerstroke250's Avatar
Thread Starter
|
Diesel Fan
Joined: Jan 2010
Posts: 36
Likes: 1
From: milwaukee wisconsin
Default

thanks for all the help we couldn't find one at a junk yard. ford didn't help out much so i ended up finding one from a friend who owns a shop. and it replaced the aluminum and orange part. i guess they had some problems with that orange hose corroding. the new one is alot nicer.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carid
Diesel Bombers Sponsors
1
Nov 2, 2015 09:58 AM
caissiel
Ford Powerstroke 03-07 6.0L
1
Sep 24, 2015 05:37 PM
willyam
Price Quote - Request A Price
1
May 19, 2015 10:20 AM
jrsavoie
Chevy/GMC 6.2L and 6.5L
1
Feb 6, 2015 09:44 PM
hoeky22
12 Valve 2nd Gen Dodge Cummins 94-98
4
Jan 2, 2015 04:54 PM




All times are GMT -5. The time now is 03:08 AM.