Ford Powerstroke 94-98 7.3L Discussion of 94-98 7.3 Liter Ford Powerstroke Turbo Diesels

Rough idle need help!!!!!!!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 10-18-2015, 06:56 PM
Brendancory1992's Avatar
Newbie
Thread Starter
Join Date: Aug 2015
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default Rough idle need help!!!!!!!!!

http://youtu.be/f9Lx9ZhvT9I

Happened while I was at a stop light. No signs of trouble just happened out of no where. No power when I hit the throttle. No idea what it could be. Anyone that could help me out?!!!
 

Last edited by Brendancory1992; 10-18-2015 at 06:58 PM.
  #2  
Old 10-19-2015, 07:06 PM
FRIDAY88's Avatar
Diesel Enthusiast
Join Date: May 2010
Location: BATTLE MOUNTAIN
Posts: 298
Likes: 0
Received 7 Likes on 7 Posts
Default

Is it hard to start?
 
  #3  
Old 10-19-2015, 07:29 PM
Brendancory1992's Avatar
Newbie
Thread Starter
Join Date: Aug 2015
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by FRIDAY88
Is it hard to start?
No the it starts up like normal but immediately goes to ruff idle and if I go to drive it, it has no power hardly and sounds sometimes like it wants to stall. But i assume that's just because the rpms are jumping all over the place
 
  #4  
Old 10-19-2015, 08:37 PM
FRIDAY88's Avatar
Diesel Enthusiast
Join Date: May 2010
Location: BATTLE MOUNTAIN
Posts: 298
Likes: 0
Received 7 Likes on 7 Posts
Default

Any codes? What's been done to the truck
 
  #5  
Old 10-19-2015, 10:19 PM
Brendancory1992's Avatar
Newbie
Thread Starter
Join Date: Aug 2015
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by FRIDAY88
Any codes? What's been done to the truck
The check engine like came on but I can't find anyone with a code reader plus an auto shop around me charges up to 100 dollars. I can't even drive the truck, has no power hardly. The only performance upgrade is a 6 set tuner chip.
 
  #6  
Old 10-19-2015, 11:27 PM
FRIDAY88's Avatar
Diesel Enthusiast
Join Date: May 2010
Location: BATTLE MOUNTAIN
Posts: 298
Likes: 0
Received 7 Likes on 7 Posts
Default

I honestly would get a code reader before you go picking and throwing parts at it if it has a CEL it will most likely tell you the problem
 
  #7  
Old 10-20-2015, 10:14 AM
Brendancory1992's Avatar
Newbie
Thread Starter
Join Date: Aug 2015
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by FRIDAY88
I honestly would get a code reader before you go picking and throwing parts at it if it has a CEL it will most likely tell you the problem
Yea that been my plan just working on finding one
 
  #8  
Old 07-19-2016, 06:52 PM
PacRat's Avatar
Newbie
Join Date: Jul 2016
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

My 2004 was doing the same thing. I replaced the ipc and the plug for it. Helped for a couple days then went back to the same problem. Believe it or not I unplugged the Mass air flow and the ipc coated them with electrical silicone and plugged them back in. Problem solved cost $7.00
 
  #9  
Old 07-22-2016, 12:47 PM
Bigg Redd's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: TEXAS
Posts: 2,448
Received 310 Likes on 299 Posts
Default

Take it to an Autozone or Oreilleys and you can have it scanned for free, and they'll give you a print-out with the code(s). Then, you can fix whatever needs fix'in.
 




All times are GMT -5. The time now is 12:00 AM.