Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 94-98 7.3L (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/)
-   -   Rough idle need help!!!!!!!!! (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/128454-rough-idle-need-help.html)

Brendancory1992 10-18-2015 06:56 PM

Rough idle need help!!!!!!!!!
 
http://youtu.be/f9Lx9ZhvT9I

Happened while I was at a stop light. No signs of trouble just happened out of no where. No power when I hit the throttle. No idea what it could be. Anyone that could help me out?!!!

FRIDAY88 10-19-2015 07:06 PM

Is it hard to start?

Brendancory1992 10-19-2015 07:29 PM


Originally Posted by FRIDAY88 (Post 1100919)
Is it hard to start?

No the it starts up like normal but immediately goes to ruff idle and if I go to drive it, it has no power hardly and sounds sometimes like it wants to stall. But i assume that's just because the rpms are jumping all over the place

FRIDAY88 10-19-2015 08:37 PM

Any codes? What's been done to the truck

Brendancory1992 10-19-2015 10:19 PM


Originally Posted by FRIDAY88 (Post 1100924)
Any codes? What's been done to the truck

The check engine like came on but I can't find anyone with a code reader plus an auto shop around me charges up to 100 dollars. I can't even drive the truck, has no power hardly. The only performance upgrade is a 6 set tuner chip.

FRIDAY88 10-19-2015 11:27 PM

I honestly would get a code reader before you go picking and throwing parts at it if it has a CEL it will most likely tell you the problem

Brendancory1992 10-20-2015 10:14 AM


Originally Posted by FRIDAY88 (Post 1100938)
I honestly would get a code reader before you go picking and throwing parts at it if it has a CEL it will most likely tell you the problem

Yea that been my plan just working on finding one

PacRat 07-19-2016 06:52 PM

My 2004 was doing the same thing. I replaced the ipc and the plug for it. Helped for a couple days then went back to the same problem. Believe it or not I unplugged the Mass air flow and the ipc coated them with electrical silicone and plugged them back in. Problem solved cost $7.00 :jump:

Bigg Redd 07-22-2016 12:47 PM

Take it to an Autozone or Oreilleys and you can have it scanned for free, and they'll give you a print-out with the code(s). Then, you can fix whatever needs fix'in. :tu:


All times are GMT -5. The time now is 01:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands