Super Duty Axles
#1
Super Duty Axles
Ive got a 96 F250 with the ttb front end and recently got my hands on a set of front and rear super duty axles. ive got all the shackles and steering components. sky-manufacturing makes a kit to mount these axles to the obs fords, but i didnt know if since i had the mounting hardware if it would bolt up(minus a few holes in the frame maybe). i havent gotten a chance to measure it up yet but thought id get some feedback from people that have done it before. thank you
#2
#4
That is a dana 50 unless it is from a dually. I believe the dana 50's have a number on them might be a sticker I think it says 229, dana 60's say 248 I think. Honestly your ttb front end is stronger, if it is a 50 which I am pretty sure it is.
---AutoMerged DoublePost---
I know you have the rears already but I would pawn them off and just buy a front dana 60 preferably 1986-91 (they are kingpin much stronger) it will for the most part just bolt in you will need to get a track bar and bracket and you might need larger blocks for the rear end to make up the height difference.
---AutoMerged DoublePost---
I know you have the rears already but I would pawn them off and just buy a front dana 60 preferably 1986-91 (they are kingpin much stronger) it will for the most part just bolt in you will need to get a track bar and bracket and you might need larger blocks for the rear end to make up the height difference.
Last edited by oldmansimek; 03-04-2014 at 11:36 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
11-23-2015 11:39 AM
1ATony
1A Auto Parts
1
10-29-2015 02:11 PM
1ATony
1A Auto Parts
1
10-26-2015 02:44 PM
1ATony
1A Auto Parts
0
09-02-2015 01:03 PM