4x4 indicator light problems
#1
4x4 indicator light problems
Hi guys,
Got a new switch for my transfer case on my 1997 7.3 4x4 with manual transfer case and manual hubs. Before the new switch I had no light on the dash, even after replacing the bulbs and chasing the wiring around for loose connections.
Replaced the switch and now have the 4x4 light flickering when im in 4xhigh ( i can kinda get it to stay on if i hold the lever just right) and the 4x4 light stays on like it should in 4xLow, but the Low Range Light never comes on.
I know the bulbs in the dash are new and the test light showed power to both of the lights. I am assuming that the transfer case switch just grounds those lights when the plunger ball gets pushed, so is there and adjustment that I am missing? or does and one else have any ideas?
Sorry that was longwinded
Thanks for your help
Got a new switch for my transfer case on my 1997 7.3 4x4 with manual transfer case and manual hubs. Before the new switch I had no light on the dash, even after replacing the bulbs and chasing the wiring around for loose connections.
Replaced the switch and now have the 4x4 light flickering when im in 4xhigh ( i can kinda get it to stay on if i hold the lever just right) and the 4x4 light stays on like it should in 4xLow, but the Low Range Light never comes on.
I know the bulbs in the dash are new and the test light showed power to both of the lights. I am assuming that the transfer case switch just grounds those lights when the plunger ball gets pushed, so is there and adjustment that I am missing? or does and one else have any ideas?
Sorry that was longwinded
Thanks for your help
#2
Thread
Thread Starter
Forum
Replies
Last Post
Sculpturesylvan
General Diesel Related
0
10-18-2014 10:19 PM