how to replace gerotor
#1
#2
#3
#4
Look at the new gears you got, did they come with a new wear ring for the crank? I haven't done one of these but I know at least on earlier models there is a wear ring that has to b e cut off or pulled off if you have the $800 dollar tool to do it, maybe a youtube search. you might have to rock the crank back and forth a little bit to get the gears to relax just right. I will search YT and post if I find it
#5
#6
pretty sure you are going to have a wear ring, it will prevent you from pulling the inner gear off, read where it can be cut with a hacksaw blade most of the way then popped with a chisel. wait till you get the new gears before you attemp any of this, make sure it has the wear ring with it, if it does then we can address it when the parts arrived.
#7
ok ya i got the new seal looks like there is a wear ring and have to pop it off the crankshaft.Im gonna try to pop it off hopefully not scratching everything too bad.
---AutoMerged DoublePost---
well i feel like a idiot now i just put a little flat head in the opening side of the outer gear and sure enough she slide out .Anyways thanks for your help
---AutoMerged DoublePost---
well i feel like a idiot now i just put a little flat head in the opening side of the outer gear and sure enough she slide out .Anyways thanks for your help
Last edited by ArNy64; 06-21-2012 at 05:51 PM. Reason: Automerged Doublepost
#9
#10