Turbo hose blows off
#51
02-15-2012, 01:17 PM
Karl, good thing we have Iron heads huh? 
bkmac, male or female, it sounds like the dealership is just trying to take advantage no matter what. A lot of people these days don't work on their own stuff, and a first time diesel owner would certainly be overwhelmed the first time they open their hood, I know I was. There's a lot going on under there if you don't know what is what.
bkmac, male or female, it sounds like the dealership is just trying to take advantage no matter what. A lot of people these days don't work on their own stuff, and a first time diesel owner would certainly be overwhelmed the first time they open their hood, I know I was. There's a lot going on under there if you don't know what is what.
#53
02-15-2012, 05:32 PM
Karl, good thing we have Iron heads huh?
bkmac, male or female, it sounds like the dealership is just trying to take advantage no matter what. A lot of people these days don't work on their own stuff, and a first time diesel owner would certainly be overwhelmed the first time they open their hood, I know I was. There's a lot going on under there if you don't know what is what.
bkmac, male or female, it sounds like the dealership is just trying to take advantage no matter what. A lot of people these days don't work on their own stuff, and a first time diesel owner would certainly be overwhelmed the first time they open their hood, I know I was. There's a lot going on under there if you don't know what is what.
Ther IS a lot going on under that hood, holy crap!Hmm, guess it explains why guys say they are so damn hard to lift out.
On the up side, I know my NDI methods.
I LIKE TURTLES! Sometimes I wonder how I got this far in life. I'll just sit in the back of the short bus with my drool up and be quiet, except for an occassional "NAAAHHHH! I LIKE TURTLES! NAAHHHH!"
The following users liked this post:
03Powerstroke (02-15-2012)
#54
02-15-2012, 07:08 PM
#55
02-29-2012, 05:38 PM
Join Date: Feb 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Ok the shop pretty much couldn't tell me why it was blowing off. So I went ahead and orderd that cac tube brace, I figure anything will help. Funny thing though, I called the place that's selling that brace and he told me he had the same problem and ford bought it back. Go figure! I always got the run around. As far as the exhaust leak goes they replaced my manifolds, I guess they were warped and was told looked like they had been droped. Got the sct live wire installed. I have been a little intimadated to change programs, they told me I was on tow. Supposedly they input my upgrades into it. It's deffenitly a lot quicker. And yes I am a guy. LargeMarge is just one of many nicknames.
#56
03-01-2012, 07:26 AM
#57
03-01-2012, 10:50 AM
It just hit me like a ton of bricks!!!! I remember reading some threads a long time ago about fixing issues similar to this on high HP trucks.
Take the CAC tube off the truck, and the end that is blowing off... have someone weld a bead all the way around the pipe to effectively make a "raised edge" there... then reinstall. As long as the clamp is tight, there should be no way it can pull over that ridge. Probably wouldn't cost very much, and it'd be easy enough to try!
Thoughts?
Take the CAC tube off the truck, and the end that is blowing off... have someone weld a bead all the way around the pipe to effectively make a "raised edge" there... then reinstall. As long as the clamp is tight, there should be no way it can pull over that ridge. Probably wouldn't cost very much, and it'd be easy enough to try!
Thoughts?
The following users liked this post:
Karls03 (03-01-2012)
#58
03-01-2012, 10:51 AM
Diesel Bomber
#59
03-01-2012, 11:38 AM
Diesel Enthusiast
Of course, you're dealing with Californian labor rates, so don’t tell Mdub707 how much you had to pay. Just kiddin'!
---AutoMerged DoublePost---
Of course, you're dealing with Californian labor rates, so don’t tell Mdub707 how much you had to pay. Just kiddin'!
---AutoMerged DoublePost---
Of course, you're dealing with Californian labor rates, so don’t tell Mdub707 how much you had to pay. Just kiddin'!
Last edited by Eddiebuntain; 03-01-2012 at 11:38 AM. Reason: Automerged Doublepost
#60
03-01-2012, 12:07 PM
That ain't no joke! I thought NY was bad... you guys got it rough out there! I see guys offering headstud/egr delete jobs for UNDER $2500 on the forums...
