Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Lawsuit

Thread Tools
 
Search this Thread
 
  #11  
Old 12-28-2011, 02:15 PM
HeavyAssault's Avatar
Diesel Wrench
Join Date: Jan 2009
Location: VA
Posts: 854
Received 62 Likes on 59 Posts
Default

Originally Posted by Benjamin
well not exactly as you are saying here. It will be easy to prove,

if the injectors went bad multiple times then a K&N intake will have nothing to do with that,
if he has had EGR failures, the K&N filter had nothing to do with that,
if he had an oil leak the K&N intake had nothing to do with that.
BUT if he had a turbo failure, they would have to prove that the K&N intake WAS responsible for the failure BUT most of the time it is cause by sticking vanes in the exhaust housing that will cause the turbo failure that the K&N intake has nothing to do with.....

so that being said, it is worth looking into for those who have had the above problems.
It's on you to prove Ford parts failed not on Ford to prove the K&N caused the failure. In the end unless you know Moss/Magnason (SP?) backwards and forwards with your state law license in your pocket you will never touch a Ford check written as an award to a lawsuit awarded by a US court.

---AutoMerged DoublePost---

Originally Posted by Mdub707
Your Ford owners manual clearly states they can void your warranty if you run ANY non Ford parts. Your typical magnusson moss warranty jargon doesn't apply to these trucks. If you think you have the time/money to fight Ford on it, go for it, or buy another truck. At this point I doubt anyone in this thread has a foot to stand on regarding that lawsuit. I knew what I was buying when I got it, I certainly don't blame Ford for that.
I'll agree to the Ford manual statement but disagree to the MM jargon applying to these trucks. It becomes a fight in the courts and who has the deepest pockets in the end.

There is a guy who does the billet fender/door badges. Ford got a cease and desist order preventing him from making the badges. He used the Ford font and was creating several different variations. In the end he is limited to what he can make for badges with regard to the wording and such. Ford even tried to make one of his customers take off the badges at a truck show. Needless to say the truck show guy told them to pack sand since Ford has no rights after the product has been sold.

In the end you got to have big stones to go against those guys. They will settle out of court LONG before a class-action suit hits the courts.
 

Last edited by HeavyAssault; 12-28-2011 at 02:15 PM. Reason: Automerged Doublepost
The following users liked this post:
Karls03 (12-28-2011)
  #12  
Old 12-28-2011, 02:19 PM
Mdub707's Avatar
BOMBARDIER
Join Date: Oct 2007
Posts: 8,208
Received 630 Likes on 510 Posts
Default

billetbadges? I heard about that too.

In the end, even if you had the stones to go up against them, I don't know anyone who has enough money to try...
 
  #13  
Old 12-28-2011, 02:43 PM
bkmac's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2011
Posts: 217
Received 21 Likes on 17 Posts
Default

I personally wasn't pursuing it but just threw it out there for general info. I was a Ford guy before I bought my PSD. Had a 96 with a 460 that had 298,000 miles on it when I sold it and it never had a problem. I wasn't aware of the PSD problems but the truck has treated me decent. It's got some problems but so far besides tires and LOF I haven't had to spend more then 3 grand on it and some of that was stuff that I could had done myself but either didn't have the time or the space to do.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
umotorsports
Ford Powerstroke 03-07 6.0L
2
10-13-2015 08:06 AM



Quick Reply: Lawsuit



All times are GMT -5. The time now is 09:50 AM.