FICM PROBLEMS
#1
#2
Is it turning over and just not firing? Any smoke coming out the exhaust? If so, what color? If not, then it's a good chance there's a bad connection at the FICM, try pushing the plugs in all the way under the FICM. What did you do with the old FICM? Did you test the voltage on this new one?
#3
#4
I can fix them FYI.
Did you test the new FICM since the no start issue? Does it have 48V? No smoke means the injectors are not firing, my guess is it's just a loose connection somewhere, and since the FICM was the last thing replaced I'd be checking all of that over. If that's all tight, gotta start working down the line here...
Did you test the new FICM since the no start issue? Does it have 48V? No smoke means the injectors are not firing, my guess is it's just a loose connection somewhere, and since the FICM was the last thing replaced I'd be checking all of that over. If that's all tight, gotta start working down the line here...
#5
Well tested it again had 48 volts took it off and plugged back up to make sue it was connected good still nothing by the way what u charge to fix them would like to get my old one fixed for back up
---AutoMerged DoublePost---
Possible icp?
---AutoMerged DoublePost---
Possible icp?
Last edited by powerstrokin2004; 09-30-2011 at 09:55 AM. Reason: Automerged Doublepost
#6
#8
Thread
Thread Starter
Forum
Replies
Last Post
DODGEARMYGUY
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
03-03-2015 11:40 AM
makuloco2000
Ford Powerstroke 03-07 6.0L
1
02-15-2015 02:31 PM
JRB1960
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
12-01-2014 09:24 PM