Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

trailer brakes fuel level

Old May 30, 2011 | 08:44 PM
  #1  
csdiesel's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2010
Posts: 55
Likes: 0
From: rapid city
Default trailer brakes fuel level

On my 05 6.0l every now and then my trailer brake will light up and on the dash it will say trailer disconnected. and none of my trailers have trailer brakes. also my fuel level guage to day went from 3/4 to empty and said low fuel level, and i am certain it was at only half. if you guys have any ideas would be really helpfull. thanks. d
 
Reply
Old Jun 5, 2011 | 10:57 PM
  #2  
PowerstrokeTech87's Avatar
Diesel Enthusiast
Joined: Jun 2011
Posts: 138
Likes: 16
From: copake
Default

check fuses first, ive replaced a few clusters in 05-07s for all kinds of issues. had 1 that the water in fuel light came on intermittently and i pulled the HMFC and replaced the filter and sensor took fuel samples from the tank and had no signs of water or other contamination in found it to be the cluster. could also try a simple reprogram for the cluster at a dealership.
 
Reply
Old Jun 6, 2011 | 08:56 PM
  #3  
csdiesel's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2010
Posts: 55
Likes: 0
From: rapid city
Default

thats a good idea. i got to go there any way, i just took a road trip blew out a hub cap, blew the plastic charged air cooler pipe, cracked the window, smashed 3 birds and a stray shopping cart
 
Reply
Old Jun 9, 2011 | 06:56 PM
  #4  
csdiesel's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2010
Posts: 55
Likes: 0
From: rapid city
Default

whats a hmfc again?
 
Reply
Old Jun 9, 2011 | 11:11 PM
  #5  
PowerstrokeTech87's Avatar
Diesel Enthusiast
Joined: Jun 2011
Posts: 138
Likes: 16
From: copake
Default

horizontal mounted fuel conditioner (where the bottom fuel filter is)
 
Reply
Old Jun 10, 2011 | 10:42 PM
  #6  
csdiesel's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2010
Posts: 55
Likes: 0
From: rapid city
Default

thanks
 
Reply
Old Jun 13, 2011 | 05:36 AM
  #7  
Cowboy Cadillac's Avatar
Diesel Fan
Joined: May 2010
Posts: 99
Likes: 3
From: Rock Hill, SC
Default

Originally Posted by csdiesel
thats a good idea. i got to go there any way, i just took a road trip blew out a hub cap, blew the plastic charged air cooler pipe, cracked the window, smashed 3 birds and a stray shopping cart
Sounds like a great weekend

as for the trailer... are you using a splitter or do you have the correct plug on the trailer. I have had issues with some of those.
 
Reply
Old Jun 13, 2011 | 11:20 PM
  #8  
csdiesel's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2010
Posts: 55
Likes: 0
From: rapid city
Default

i have a 7 pin in the bed and a 4 pin at the bumper. that light and alarm will come on pulling trailer and empty. i pulled the fuse for the controller. and it doesnt come on as often. im going to tear into the relays tomorrow. stupid 12 hr shifts at work.
 
Reply
Old Jun 14, 2011 | 05:07 AM
  #9  
Cowboy Cadillac's Avatar
Diesel Fan
Joined: May 2010
Posts: 99
Likes: 3
From: Rock Hill, SC
Default

I here you on the 12hr. shifts If I were you I would definately check that 7 pin in the bed first. Seeing as it is the only one that should be connected to the built-in break controler. Surf the web and I bet you can find the propper wiring schematic for your truck or take it by the closest trailor sales shop and have them take a look
 
Reply
Old Jun 14, 2011 | 05:25 PM
  #10  
csdiesel's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2010
Posts: 55
Likes: 0
From: rapid city
Default

will do. this site is awsome. you guy provide the best info. thank you.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:56 PM.