Need help please
Thread Starter
|
Newbie
Joined: Oct 2010
Posts: 1
Likes: 0
Need help please
I changed my fuel filter and now my truck will not purge the air out of system...any ideas would be appreciated.
---AutoMerged DoublePost---
Tried reseating filter and a new one no luck so far..
---AutoMerged DoublePost---
Sends no fuel to the top filter bowl...
---AutoMerged DoublePost---
Tried reseating filter and a new one no luck so far..
---AutoMerged DoublePost---
Sends no fuel to the top filter bowl...
Last edited by sswebber700; Oct 2, 2010 at 01:26 PM. Reason: Automerged Doublepost
Newbie
Joined: Oct 2010
Posts: 5
Likes: 0
From: PAC NW
can u hear pump run when turning key to 'on'
---AutoMerged DoublePost---
Use OEM filters & new o rings. o rings fully seated? with it all buttoned up & key "on" , try & spray soapy water around filter housings, any bubbles? Bubbles indicate leaks.
---AutoMerged DoublePost---
Use OEM filters & new o rings. o rings fully seated? with it all buttoned up & key "on" , try & spray soapy water around filter housings, any bubbles? Bubbles indicate leaks.
Last edited by shooter 7; Oct 2, 2010 at 02:16 PM. Reason: Automerged Doublepost
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
A lot of times it's the frame mounted one that causes issues. It is really hard to tell if it's fully seated without a fuel pressure gauge.
I'd pull that cap off, put some oil on the o-ring and try re-seating it.
Like shooter said, can you hear the pump kick on?
I'd pull that cap off, put some oil on the o-ring and try re-seating it.
Like shooter said, can you hear the pump kick on?
