My oil temps run about 195 to 210 and the bullydog pmt pops up and says defueling oil. My ? is ,how high is to high for the oil temps. and do I need to rest the default to a little higher temperture setting. I dont know alot about these things so any help would be great. Thanks

 

oil temp is not suposed to exceed 15 degrees more then coolant temp... my oil cooler is bad so mine is runnin around 230 and coolant is always 189-195.... so ur temps sound good to me but thats just my opinion

 

Those temps sound safe to me. Oil temp VS. Coolant temp is more important not so much the single number. The truck will beep and flash some warning lights at you when oil temp gets too high. I've done it before. I'd set the PMT higher, or just get an SCT and not worry about that!

 

I really want the sct, but until I can sell this bullydog pmt, I will just have to wait. Thanks for the info guys...

 

Put it on craigslist or ebay and then pick up a used xcal 2 on the forums. I've seen them go for $150 before.

 

Do I need to put a screw or something in the hole they made for the pyro wire

 

Yes! It is probably a 1/8NPT pipe thread.

 

thanks