2004 6.0 powerstroke running problems update
ok guys got an update.the shop is saying i got either a bad injector or head gasket or maybe a fuel related sensor there saying that its not running on all cylinders then it will for a min after i hold it at 3000 rpms for a min.and what its doin is while your reving it its blowing like white smoke out pipe bad and its got a raw diesel smell to it.and it cuts out and misses badly then sometimes it will open up and run good but most of the time it wont.but there computer aint working they said it wuld be a couple of days till they got it working. i live in a hicktown by the way. so does anyone have any ideas all stock just strait exhaust. thanks in advance
---AutoMerged DoublePost---
ive already fixed y pipe .cleaned turbo,cleaned egr valve,replaced map sensor and hose,cant think of anything else at time any help would be much appreciated.
---AutoMerged DoublePost---
ive already fixed y pipe .cleaned turbo,cleaned egr valve,replaced map sensor and hose,cant think of anything else at time any help would be much appreciated.
Last edited by aaronmoore; Aug 25, 2009 at 12:54 AM. Reason: Automerged Doublepost
the white smoke would be a head gasket most likely, but for some reason the EGR would have a role in that too. (sometimes that would dump coolant into the oil for some reason im not exactly sure why this design does that.) but a dead miss or a rough running condition would be caused by an injector or the injector wiring harness, maybe a burned wire.
Thread
Thread Starter
Forum
Replies
Last Post
Tylerbuckley
Ford Powerstroke 03-07 6.0L
9
Sep 21, 2015 08:24 PM
cjgregory
Diesel In Distress - Support Ticket
0
Mar 31, 2015 01:45 PM
mrfizz2012
Ford Powerstroke 03-07 6.0L
2
Dec 11, 2014 10:38 PM



