5r110 Torqshift Building
#1
5r110 Torqshift Building
Hopefully this is the correct place for this thread!
I am running a cummins powered 04 superduty, with a 5r, along with a pcs controller. Today I was driving the truck, and will admit, I was ragging on it fairly hard. To may knowledge according to the PO, the trans is completely stock. Now to my knowledge, these trans' are usually good up to around 500hp, driving within reason. My cummins is roughly 500-+, so I figured it was living on edge anyways.
Now,
The trans is completly fine taking off, and running through 2nd, and most of 3rd, then it begins to slip, BAD. To the point where it is about undriveable. I am assuming this will mean pulling the trans and doing a full rebuild. Now, Like most others I am on a budget, and am not looking for the best of the best, but want good stuff within reason. Would someone mind reccomending me a list of parts to do so at a reasonable cost? I have no problem building the trans myself, I am just new the 5r world, and am not sure where to start, or what is worth upgrading. The truck will stay 4-500 hp, and is a dd. Occasionally I have a heavy foot, and yes the truck gets beat on here and there. I am not going to lie about it. Also, is it worth purchasing a TQ converter while I am in there doing it all? I would prefer to stay under ~800 for the trans parts, and I guess I will bite the bullet if I need a converter as well.
Thanks guys!
I am running a cummins powered 04 superduty, with a 5r, along with a pcs controller. Today I was driving the truck, and will admit, I was ragging on it fairly hard. To may knowledge according to the PO, the trans is completely stock. Now to my knowledge, these trans' are usually good up to around 500hp, driving within reason. My cummins is roughly 500-+, so I figured it was living on edge anyways.
Now,
The trans is completly fine taking off, and running through 2nd, and most of 3rd, then it begins to slip, BAD. To the point where it is about undriveable. I am assuming this will mean pulling the trans and doing a full rebuild. Now, Like most others I am on a budget, and am not looking for the best of the best, but want good stuff within reason. Would someone mind reccomending me a list of parts to do so at a reasonable cost? I have no problem building the trans myself, I am just new the 5r world, and am not sure where to start, or what is worth upgrading. The truck will stay 4-500 hp, and is a dd. Occasionally I have a heavy foot, and yes the truck gets beat on here and there. I am not going to lie about it. Also, is it worth purchasing a TQ converter while I am in there doing it all? I would prefer to stay under ~800 for the trans parts, and I guess I will bite the bullet if I need a converter as well.
Thanks guys!
#3
Found this place on the internet, prices look real good, but I haven't done any business or know anybody that has done business with this company. Ask questions & do research
5R110 Transmission Sale | 5R110W Rebuild
5R110 Transmission Sale | 5R110W Rebuild
#5
Building A Ford 5R110 Trans: Diesel Technology?s Right Parts For The Job ? Diesel Power Engine
The following users liked this post:
Adrenaline junkie (09-08-2014)
#6
Thread
Thread Starter
Forum
Replies
Last Post
Big-j
Ford Powerstroke 03-07 6.0L
5
09-20-2015 11:31 AM
Beckalynn211
5.9 Liter CR Dodge Cummins 03-07
4
07-01-2015 12:45 PM
wannadrag
Ford Powerstroke 03-07 6.0L
7
05-25-2015 03:07 PM